A quick card

I had to make a quick card this morning. I matt and layered my card with green and

then white embossed. I die cut the elements using a die set from Sweet Dixie. I paper pieced these die cut elements.

I would like to enter this creation into the following challenges:

throughthecraftdoor #30th June - anything goes (1/2)

craftinghappiness #55 - anything goes (unlimited)

artydivas #25 - anything goes (1/5)

Christmas Star

After seeing a creation on the T.V. I found a video by Crafters Companion on YouTube to help me make this creation. I have used white 5x7in cards. I cut 5 gold pieces of card measuring 9.5in by 7in and scored them down the centre. I die cut the Create-a-card dies into the gold card. I attached the gold card inside the white cards by attaching the edges which results in there being a gap between the layers at the crease because the gold piece of card is 1/2in shorter. I attached all 5 cards together. When the star is closed like a book I have wrapped satin ribbon around the book with red liner tape. I added the gold embossed card onto the cover over the ribbon. I added strips of white card on the sides of the die cut area along with the satin ribbon. I added die cut holly and snowflakes to the white areas and embellished them with gems and pearls.

I would like to enter this creation into the following challenges:

craftycatzweekly #512 - anything goes (2/3)

pennys #474 - anything goes (2/3)

craftyhazelnutschristmas #496 - anything Christmas/use snowflake (unlimited)

daringcardmakers #26th June - let's go 3D

hereisaplacetostart #June 2020 - shaped card (2/8)

creativefingers #189 - anything goes (2/3)

craftinghappiness #55 - anything goes (unlimited)

Cute Deer Card

I have matt and layered my 8x8in white card with pink and tan card. I have cut lengths of green card with a Memory Box grass die. I attached white embossed card on the top of my card before adding layers of grass on the bottom of my card. I then added a fence that I cut with a Memory Box die and completed the layers with another layer of grass. I die cut the tree using a Memory Box die and added small pink flowers that I cut with a Cheery Lynn die. I cut three deer with a Marianne die set and attached them to my card amongst the grass. I added bigger flowers (cut with a punch) to co mplete my card.  

I would like to enter this creation into the following challenges:

craftycatzweekly #512 - anything goes (1/3)*

lilpatchofcraftyfriends #134 - anything goes (3/3)*

tuesdaytaggers #23rd June - create a scene (unlimited)

diesrus #147 - summer time (1/3)

pennys #474 - anything goes (1/3)

allsorts #578 - cute (1/3)* Top 3

tuesdaythrowdown #460 - anything goes (1/1)

throughthefcraftroomdoor #23rd June - anything goes (2/2)

creativefingers #189 - anything goes (1/3)

cutecardthursday #640 - flowers

Teddy Father's Day card

I have matt and layered my 5x7in white card with blue card and white embossed card. I embossed the white card with a Tattered Lace embossing folder. I curved all the corners with a punch before attaching them to my card. I die cut the teddies with a Tonic die. I cut the teddies in kraft card then paper pieced them with blue and red card. I completed the teddies by adding eyes using Tonic Nuvo Drops. I printed a sentiment and die cut it with a Presscut oval die from a nesting set, I mounted the sentiment onto a blue oval before attaching it to my card. I completed my card with stars that I cut with a punch.

I would like to enter this creation into the following challenges:

aperfecttimetocraft #June - anything goes (unlimited)*

pearlysparkles #52 - for the boys/men (unlimited)*

unicorn #55 - masculine (unlimited)*

craftrocket #71 embossing/wet or dry* Top 3

dragonflydreams #7th June - make it masculine (unlimited)

craftycatzweekly #511 - anything goes (3/3)*

lilpatchofcraftyfriends #134 - anything goes (2/3)

craftyfriends #138 - men and/or boys (3/3)

throughthecraftroomdoor 23rd June - anything goes (1/2)*

Father's Day card

I have matt and layered my 8x8in white card with gold mirri card and white embossed card. I added satin ribbon across my card and then added a picture from a Hunkydory little book. I printed a sentiment and die cut it with a Spellbinders die from a nesting set and mounted it before adding it to my card. I completed my card with Tonic Nuvo drops

I would like to enter this card into the following challenges:

aperfecttimetocraft #June - anything goes (unlimited)*

pearlysparkles #52 - for the boys/men (unlimited)*

unicorn #55 - masculine (unlimited)*

tuesdaytaggers 9th June - make it masculine (unlimited)*

creativeinspirations #June - let's hear it for the boys*

papercraftchallenge #30 - Father's Day/male (3/3)*

dragonflydreams #7th June -make it masculine (unlimited)

craftrocket #71 - embossing/wet or dry (unlimited)*

craftycatzweekly #511 - anything goes (2/3)*

lilpatchofcraftyfriends #134 - anything goes (1/3)

craftyfriends #138 - men and/or boys (2/3)

Father's Day pop up box

I have made this box using an 30cm by 15cm piece of white card.

I scored the card at 7cm, 14cm and 28cm

I scored width of the card at 7cm

I used the 2cm on the end of the scored card as a glue tab. On the top section of the box cut this section away.

Attach strips of card inside the box. Cut 9cm strips and score 1cm one each side and these will be your glue tabs.

I attached acetate to the strips to add my embellishments. I have used various die cuts. I printed personalised sentiments and attached them to the box.

 I would like to enter this creation into the following challenges:

audsentiments #253 - anything goes with sentiment (5/5)*

aperfecttimetocraft #6 - anything goes (unlimited)*

pearlysparkles #52 - for the boys/men (unlimited)*

unicorn #55 - masculine (unlimited)*

tuesdaytaggers #9th June - make it masculine (unlimited)*

notjustcards #June - anything goes (5/5)

creative inspirations #June - lets hear it for the boys*

papercraftchallenge #30 -fathers day/male (2/3)*

createfulheartcards #21 - anything goes (3/3)*

dragonflydreams #7th June - make it masculine (unlimited)*

letscreate #160 - anything goes and punch it (3/3)

craftycatzweekly #511 - anything goes (1/3)*

hereisaplacetostart #June 2020 - shaped card (1/8)*

craftyfriends #138 - men and/or boys (1/3)

Father's Day card

I have matt and layered my 8x8in white card with kraft and mirri embossed card. I used an Xcut embossing folder. I have used some scrabble letter embellishments and  mounted them on kraft and mirri squares cut with dies from a nesting set from The Works. I printed the other sentiments and cut them to fit my card.

I would like to enter this creation into the following challenges:

audsentiments #253 - anything goes with a sentiment (4/5)*

aperfecttimetocraft #6 - anything goes (unlimited)*

pearlysparkles #52 - for the boys/men (unlimited)*

corrosivechallengesbyjanet #6 - anything goes with a sentiment (4/4)*

unicorn #55 - masculine (unlimited)*

tuesdaytaggers #9th June - masculine (unlimited)*

tuesdaythrowdown #459 - special guy (3/3)*

throughthecraftroomdoor #16th June - anything goes (2/2)*

notjustcards -#June - anything goes (4/5)*

creativeinspirations #June - let's hear it for the boys*

lovetocraft #47 - anything goes (5/5)*

papercraftchallenge #30 = father's day/male (1/3)*

createfulheartcards #21 - anything goes (2/3)

dragonflydreams 7th June - make it masculine (unlimited)*

letscreate #160 - anything goes and punch it (2/3)*

craftrocket #71 - embossing wet/dry (unlimited)*

worldwideopendesignteam #6 - anything goes (3/3)* DT Favourite winner

creativecrafters #29 - anything goes (3/3)*

Christmas card with tree

I have matt and layered my 5x7in card with brown card and then gold mirri card.

I embossed the mirri card with an Embossalicious folder. I die cut the tree using a Sue Wilson die and mounted it onto brown card, gold mirri and brown card before attaching it to my card.

I added red Tonic Nuvo drops to the embossing folder to look like berries.

I would like to enter this card into the following challenges:

craftyhazelnutschristmas #494 - anything goes (unlimited)*

aperfecttimetocraft #6 - anything goes (unlimited)*

wordartwednesday #444 - anything goes (5/5)*

creativecraftcottage #130 - anything goes (5/5)*

corrosivechallengesbyjanet #6 - anything goes (3/4)*

audsentiments #253 - anything goes with sentiment (3/5)*

notjustcards #June - anything goes (3/5)*

lovetocraft #47 - anything goes (4/5)*

createfulheartcards #21 - anything goes (1/3)

craftrocket #71 embossing wet/dry (unlimited)

worldwideopendesignteam #6 - anything goes (2/3)*

creativecrafters #29 - anything goes (2/3)*

First Christmas Card for 2020

I have matt and layered my 8x8in white cream card with gold mirri card, red card and cream embossed card. I used  a Sue Wilson embossing folder.

I made the poinsettia using Marianne dies. I die cut the sentiment with an Elizabeth craft designs die.  I put the sentiment onto a cream oval that I cut with a Presscut die from a nesting set. I used the next sized die in the nesting set to cut an oval using gold mirri card and attached them to my card. I added the holly flourish that I cut with a Cheery Lynn die before adding the poinsettia. I added embellishments to the centre of the poinsettia and Tonic Nuvo drops onto the embossing and onto the holly flourish for the berries.  

I would like to enter this creation into the following challenges:

craftyhazelnutschristmas #494 - anything goes (unlimited)*

aperfecttimetocraft #6 - anything goes (unlimited)*

pennys #473 - anything goes (3/3)*

creativecraftcottage #130 - anything goes (4/5)*

corrosivechallengesbyjanet #6 - anything goes (2/4)*

audsentiments #253 - anything goes with sentiment (2/5)*

throughthecraftroomdoor #16th June - anything goes (1/2)*

notjustcards #June - anything goes (2/5)*

craftycalendar #June - flowers (2/3)*

lovetocraft #47 - anything goes (3/5)*

craftrocket #71 - embossing wet/dry (unlimited)*

worldwideopendesignteam #6 - anything goes (1/3)*

creativecrafters #29 - anything goes (1/3)*

New Baby Keepsake

I made this baby gift for a new baby boy whose Daddy is an avid Welsh rugby supporter.

The box fame measures 8x8in and is from The Range. I also purchased the large letters from The Range. I found the three feathers image online, printed it and die cut it with a rectangular die from a Tonic nesting set. I mounted this onto kraft card.

I used red card for the background and attached the large letters, spelling the new baby's Christian name across the top of my layout. I then added the three feathers image. I printed the personalised details and cut them with a banner die by Sue Wilson. I attached these to my layout. I completed the layout with the die cut rugby ball and boots cut with Sweet Dixie dies.

I would like to enter this creation into the following challenges:

aperfecttimetocraft #6 - anything goes (unlimited)*

wordartwednesday #442 - anything goes (4/5)*

unicorn #55 - masculine (unlimited)*

tuesdaythrowdown #459 - special guy (2/3)*

pennys #473 - anything goes (2/3)*

diesrus #146 - masculine (2/3)*

creativecraftcottage #130 - anything goes (3/5)*

craftyfriends #137 - anything goes (3/3)*

scrapping4fun #168 - baby (1/4)*

tuesdaytaggers #9th June - masculine (unlimited)*

notjustcards #June - anything goes (1/5)*

lilpatchofcraftyfriends #133 - anything goes (2/3)*

dragonflydreams #7th June - make it masculine (unlimited)*

corrosivechallengesbyjanet #6 - anything goes (1/3)*

lovetocraft #47 - anything goes (1/5)*

pearlysparkles #52 - boys/men (unlimited)*

throughthepurplehaze #168 - wedding/anniversary/anything goes (3/3)*

audsentiments #253 - anything goes with sentiment (1/5)*

creativeinspirations #June - lets hear it for the boys*

papercraftchallenge #30 - Father's Day/male*

Fortnite birthday card

This morning I was asked to make a birthday card for a young lad who likes gaming.

This is what I came up with quickly so they could get it in the post.

I printed a picture that I found online. I matt and layered the picture and the card with yellow and black card. I added white embossed card to the bottom of my card. I used a Xcut embossing folder. I printed a sentiment and die cut it with a die from a nesting set from The Works. I mounted the sentiment on black card. I added some stars that I cut with a punch.

I would like to enter this creation into the following challenges:

throughthecraftroomdoor #9th June (2/2)

aperfecttimetocraft #6 - anything goes (unlimited)

wordartwednesday #442 - anything goes (3/5)

lemonshortbread #121 - anything goes (3/3)

crafterscastle #June - anything goes (3/3)

unicorn #55 - masculine (unlimited)

tuesdaythrowdown #459 - special guy (1/3)

pennys #473 - anything goes (1/3)*

diesrus #146 - masculine (1/3)

creativecraftcottage #130 - anything goes (2/5)

craftyfriends #137 - anything goes (2/3)

craftycatzweekly #509 - anything goes option CAS (2/3)

lilpatchofcraftyfriends #133 - anything goes (1/3)

throughthepurplehaze #168 - wedding/anniversary/anything goes (2/3)

craftrocket #71 - embossing/wet or dry (unlimited)

creative inspirations #June - let's hear it for the boys

lovetocraft #47 - anything goes (2/5)

papercraftchallenge #30th - Father's Day/male

letscreate #160 - anything goes and punch it (1/3)

Framed wedding photo

I have used an 12x12in box frame.

I used a 12x12in sheet of pink card as my background

I added various floral embellishments and pearls to make a heart.

 I added a photo of  the happy couple,  then added the tiles and gem stone embellishments.

I would like to enter this creation into the following challenges:

throughthecraftroomdoor #9th June - anything goes (1/2)

aperfecttimetocraft #6 - anything goes (unlimited)

wordartwednesday #442 - anything goes (2/5)

lemonshortbread #121 - anything goes (2/3)

crafterscastle #June - anything goes (2/3)

cardsgalore #76 - anything goes (3/3)

creativecraftcottage #130 - anything goes (1/5)

craftyfriends #137 - anything goes (1/3)

craftycatzweekly #509 - anything goes option CAS (1/3)

craftycalendar #June - flowers (1/3)

throughthepurplehaze #168 - wedding/anniversary/anything goes (1/3)

Personalised Birthday Card

I made this card for a neighbour who is spending her birthday alone due to lock down. We couldn't even see her in the garden because of the rain.

I covered my 8x8in white card with red card and then half of my card with white embossed card. I used a Tattered Lace embossing folder. I added the dotty ribbon and the image from a Hunkydory book that I mounted onto red card. I printed a personalised sentiment and die cut it with a die from a nesting set.

throughthecraftroomdoor #2nd June - anything goes (1/2)

tuesdaytaggers #26th May - cut it out (unlimited)

aperfecttimetocraft #6 - anything goes (unlimited)

scrapping4fun #167 - animals and/or flowers (3/3)

wordartwednesday #442 - anything goes (1/5)

lemonshortbread #121 - anything goes (1/3)

creativefingers #187 - anything goes (3/3)

crafterscastle #June - anything goes (1/3)

cardsgalore #76 - anything goes (2/3)

Anniversary Card

This is my DT post for the challenge at craftyhazelnutspatternedpaper

I have made a heart easel card using various heart dies. I added patterned paper to the front of the hearts. I printed a personalised sentiment and die cut it with a Presscut oval die from a nesting set. I mounted the sentiment on a pink oval before adding it to my card. I added die cuts to the two medium hearts and then added a personalised sentiment to the smaller heart.

I would like to enter this creation in the following challenges:

creativefingers #187 - anything goes (2/3)

throughthecraftroomdoor #26th May - anything goes (2/2)

tuesdaytaggers #26 May - cut it out (unlimited)

pennys #472 - anything goes (3/3)

aperfecttimetocraft #6 - anything goes (unlimited)*honourable mention

scrapping4fun #167 - animals/flowers (2/3)*

cardsgalore #76 - anything goes (1/3)

Heart Easel birthday card

After seeing lots of inspiration for a launch of dies to make easel cards, I used the heart dies I already have to make this easel card. I printed a personalised sentiment to add to the large heart. I die cut the sentiments and numbers and added them to the other hearts. I printed a verse and added it to the

base of the easel. I completed the card with Tonic Nuvo drops.

I would like to enter this creation into the following challenges:

wordartwednesday #440 - anything goes (5/5)

avenue613 #233 - anything goes option diamonds and lace (8/8)* Top Rocker

creativefingers #187 - anything goes (1/3)

throughthecraftdoor #26th May - anything goes (1/2)*
tuesdaytaggers #26th May - cut it out (unlimited)
pennys #472 - anything goes (2/3)
craftrocket #70 - shaped card (unlimited)*

Personalised 21st Birthday Card

I have matt and layered my white 8x8in card with lilac and then white embossed card.

I printed a personalised sentiment and die cut it with a Spellbinders die from a nesting set. I attached this to a lilac scalloped circle before attaching to my card. I purchased the key from a card shop a few  years ago. I embellished the key with flowers and pearls before attaching to my card with hot glue.

Finally, I completed my card with flat backed pearls.

I would like to enter my creation into the following challenges:

aperfecttimetocraft #5 - anything goes (unlimited)*

wordartwednesday #440 - anything goes (4/5)*

avenue613 #233 - anything goes option diamonds and lace (7/8)*

creativefingers #186 - anything goes (2/3)*

throughthecraftroomdoor #26th May - anything goes (1/2)*

scrapping4fun #167 - animals/flowers (2/4)*

alphabet #22nd May - D for dry embossing (1/3)*

tuesdaytaggers #26th May - cut it out (unlimited)*

crafterscastle #May - anything goes (3/3)*

corrosivechallengesbyjanet #5 - anything goes (3/3)*

dragonflydreams #3rd May - ribbon. lace and/or pearls (unlimited)*

letscreate #159 - anything goes option ribbon, lace, twine (3/3)*

worldwideopendesign #5 - anything goes (3/3)*

pennys #472 - anything goes (1/3)*

asyoulikeit #21st May - favourite embellishment and why/

flat backed pearls add opulence to project (1/3)*

Mam birthday card

I have made an 8x8in white easel card. I matt and layered the top and bottom with pink card and then white card. I have used a Cheery Lynn die to cut the valance for the top of my card. I added the lattice that I cut with a Cheery Lynn die. I die cut a printed sentiment with a Presscut oval die from a nesting set. I attached it to a pink oval cut with the next size in the nesting set before adding it to my card. The image is from a Papermania set.

I added the sentiment to the bottom of the card that I cut with a Tonic die from a nesting set. I added this to a pink rectangle and attached it to my card with foam pads so it with act as a stopper for the easel.

I die cut the numbers using a Tonic die and added them to a die cut circle before attaching to my card.

I would like to enter this card into the following challenges:

aperfecttimetocraft #5 - anything goes (unlimited)*

wordartwednesday #440 - anything goes (3/5)

lemonshortbread #120 - anything goes (3/3)

notjustcards #May - anything goes (5/5)

avenue613 #233 - anything goes option diamonds and lace (6/8)*

pennys #471 - anything goes (3/3)

creativefingers #186 - anything goes (1/3)

worldwideopendesignteam #5 - anything goes (2/3)

Nan 90th Birthday Box

I have made this box using an 30cm by 15cm

I scored the card at 7cm, 14cm and 28cm

I scored width of the card at 7cm

I used the 2cm on the end of the scored card as a glue tab. On the top section of the box cut this section away.

Attach strips of card inside the box. Cut 9cm strips and score 1cm one each side and these will be your glue tabs.

I attached acetate to the strips to add my embellishments. I have used various die cuts with lace and ribbon to embellish the box. I printed personalised sentiments and attached them to the box.

 I would like to enter this creation into the following challenges:

aperfecttimetocraft #5 - anything goes (unlimited)*

wordartwednesday #440 - anything goes (2/5)*

throughthecraftroomdoor #19th May - anything goes (2/2)* Top 3

lemonshortbread #120 - anything goes (2/3)* Top 3

notjustcards #May - anything goes (4/5)*

avenue613 #233 - anything goes option diamond and lace (5/8)*

scrapping4fun #167 - animals/flowers (1/4) non card project* featured creation* winner

simplycreatetoo  #160 - flowers  (3/3)* winner

pennys #471 - anything goes (2/3)*

creativefingers #186 - anything goes (2/3)*

crafterscastle #May - anything goes (2/3)*

corrosivechallengesbyjanet #5 - anything goes (2/3)*

dragonflydreams #3rd May - ribbon, lace and/or pearls (unlimited)*

letscreate #159 - anything goes option ribbon. lace. twine (2/3)*

craftrocket #70 - shaped card (unlimited)*

worldwideopendesign #5 - anything goes (1/3)*

Son Birthday Card

A son Birthday card for a keen fisherman. 

I have matt and layered the top and bottom of my 8x8in easel card with brown card and then white embossed card.  I used a Xcut embossing folder. I printed a personalised sentiment and die cut it with a Tonic rectangular die from a nesting set. I used the next size in the nesting set to die cut a brown rectangle to mount the sentiment. I attached this to the base of my card with foam pads so it will act as the stopper for my easel card. I found some fishing elements in my stash which were perfect for the recipient. I completed my card with stars that I cut with a punch.

I would like to enter this creation into the following challenges:

aperfecttimetocraft #5 - anything goes (unlimited)*

wordartwednesday #440 - anything goes (1/5)

throughthecraftroomdoor #19th May - anything goes (1/2)*

lemonshortbread #120 - anything goes (1/3)*

notjustcards #May - anything goes (3/5)

avenue613 #233 - anything goes option diamonds and lace (4/8)*

pennys #471 - anything goes (1/3)*

creativecraftcottage #129 - make it masculine (1/5)*

Personalised Birthday Card

A quick and simple card because my son forgot a birthday! 

I have matt and layered my 8x8inch white card with pink and gingham card. 

I attached satin ribbon down my card. I used an image from a Hunkydory book. I printed a personalised sentiment and die cut it with a Xcut die. 

I would like to enter this card into the following challenges:

aperfecttimetocraft #5 - anything goes (unlimited)*

wordartwednesday #438 - anything goes (3/5)*

throughthecraftroomdoor #12th May (1/2)*

lemonshortbread #119 - anything goes (3/3)*

notjustcards #May - anything goes (2/5)

avenue613 #233 - anything goes option diamonds and lace (3/8)*

scrapping4fun #166 - girls (2/3)*

cardsgalore #75 - anything goes (3/3)

simplycreatetoo #160 - anything goes (2/3)*

alphabet c for checks (1/3)*

allsorts #571 - anything goes (2/3)*

Pocket Hug

s

I had the inspiration from social media.

I made this for a friend who is social distancing and finding it difficult particularly because it was her late husbands birthday on the weekend.

I cut a DL card in half. I covered the white card with lilac card. I cut all the corners with a punch.

I printed the sentiments and cut them to size. I found the small heart in my stash. I added the die cut sentiment that I die cut with a die from a nesting set from The Works. I attached these elements to the card. I added ribbon to the heart and attached it to my card using a paper fastener so the recipient can remove it.

I would like to enter this creation into the following challenges:

aperfecttimetocraft #5 - anything goes (unlimited)*

wordartwednesday #438 - anything goes (2/5)*

pennys #470 - anything goes (3/3)*

throughthecraftroomdoor #5th May - anything goes (2/2)*

lemonshortbread #119 - anything goes (2/3)*

creativefingers#185 - anything goes (3/3)*

notjustcards #May - anything goes (1/5)

avenue613 #233 - anything goes option diamonds and lace (2/8)*

scrapping4fun #166 - ladies (1/3)*

cardsgalore #75 - anything goes (2/3)

crafterscastle #May - anything goes (1/3)

corrosivechallengesbyjanet #5 - anything goes (1/3)

Sister Birthday Card

I covered my 8x8in white card blank with purple card. I have used Sue Wilson dies to die cut the panels. I added white embossed card between the two die cut elements. I used a Crafts Too embossing folder. I printed a personalised sentiment and die cut it with a die from a nesting set from  The Works. I used the next size in the set to cut the purple card to mount the sentiment. I added satin ribbon across my card before attaching the sentiment with foam pads. I completed my card with Tonic Nuvo drops.

I would like to enter this card into the following challenges:

aperfecttimetocraft #5 - anything goes (unlimited)*

wordartwednesday #438 - anything goes (1/5)*

pennys #470 - anything goes (2/3)*

throughthecraftroomdoor #5th May - anything goes (1/2)*

lemonshortbread #119 - anything goes (1/3)*

creativefingers #185 - anything goes (2/3)*

avenue613 #233 - anything goes option diamonds and lace (1/8)*

letscreate #159 - anything goes option ribbon, lace, twine (1/3)

Daughter Birthday Card

This is my DT post for the challenge over at craftyhazelnutspatternedpaper

I have made this card using elements from a Papermania set.

I have matt and layered my card with pink card then patterned paper. I shaped the corners of these layers with a punch. I printed a personalised sentiment. I added a panel with the sentiment down one side of my card then added lace and ribbon.  I mounted the toppers onto pink card and attached them to my card.

I would like to enter this card into the following challenges:

aperfecttimetocraft #5 - anything goes (unlimited)*

creativefingers #185 - anything goes (1/3)*

wordartwednesday #436 - anything goes (3/5)

pennys #470 - anything goes (1/3)*

notjustcards #April - anything goes (5/5)*

throughthecraftroomdoor #28th April - anything goes (1/2)*

lemonshortbread #118 - anything goes (3/3)*

cardsgalore #75 - anything goes (1/3)

sparklesforum #127 - spring is in the air (unlimited)*

simplycreatetoo #160 - use flowers (1/3)

Friend Birthday Card

This is very different to cards I usually make but I have been watching the doodling videos on Clarity Facebook page. This is a design I had been keeping myself busy with so decided to add it to my friends birthday card. I matt and layered my 8x8in white card with pink, black and white embossed card.

I attached my doodle to the card and then printed a personalised sentiment and die cut it with a pierced flag die by Sue Wilson.

I would like to enter this creation into the following challenges:

aperfecttimetocraft #4 - anything goes (unlimited)*

creativefingers #184 - anything goes (3/3)*

wordartwednesday #436 - anything goes (2/5)

avenue613 #232 - anything goes option geometric papers (7/8)* Top Rocker

pennys #469 - anything goes (3/3)*

notjustcards #April - anything goes (4/5)*

lilpatchofcraftyfriends #130 - anything goes (3/3)*

throughthecraftroomdoor 21st April - anything goes (2/2)*

scrapping4fun #165 - use die cuts/embossing folders (1/4)*

paperminutes #637 - doodle

lemonshortbread #118 - anything goes (2/3)*

cardz4galz #120 - black and pink (1/3)*

Captain Tom's Birthday Card

I have made this card for Captain Tom Moore. A remarkable gentleman!

I have matt and layered my 8x8in white card with red, black and white card. I embossed the white card with a Xcut embossing folder.

I cut the poppies using a die I had free with a magazine.

I die cut the Fabulous at 100 with Tonic dies. I printed the sentiment and die cut it with a die from a nesting set from The Works and used the next size die in the set to cut a shape to mount the sentiment before adding it to my card. I completed my card with stars that I cut with a punch.

I would like to enter this creation into the following challenges:

aperfecttimetocraft #4 - anything goes (unlimited)*

creativefingers #184 - anything goes (2/3)*

wordartwednesday  #436 - anything goes (1/5)

avenue613 #232 - anything goes option geometric paper (6/8)*

crafterscafe #240 - flowers (1/3)*

pennys #469 - anything goes (2/3)*

lovetocraft #45 - anything goes (5/5)*

notjustcards #April - anything goes (3/5)*

lilpatchofcraftyfriends #130 - anything goes (2/3)*

allsorts #568 - flowers and/or showers (1/3)*

creativeinspirations #April - April showers and flowers*

craftyfriends #133 - anything goes (3/3)*

throughthecraftroomdoor #21st April - anything goes (1/2)*

makemymonday #120 - spring flowers (1/3)*

lemonshortbread #118 - anything goes (1/3)*