New Baby Boy Memory Book

 

I have covered my Memory Book page with Stamperia patterned paper. I die cut the photograph element with a Tonic die. I assembled it and then attached to my page. I added a piece of card to fit inside the frame to make it easier for the recipient to add a photograph because they have a template for size. I printed the details and die cut them with Presscut dies from a nesting set then added them to blue ovals before attaching to my page. 

New Baby Boy Memory Book

 

I have used dies in 2 sizes from the Memory Book 1 Collection. I have covered the page with Stamperia paper. I created a pocket using the same size die as the actual page by cutting slightly less than half off the die cut and attaching it to the page on the three edges. I added the patterned paper to the front of the pocket.  I die cut the tags using a Tonic die.  I printed the details and die cut them with a Presscut die from a nesting set. I added the shoes which I cut with Marianne dies. I completed the tags with satin ribbon.

New Baby Boy Memory Book

 

I have used various dies from the Memory Book one set to create this page. I made an opening page and added satin ribbon as a closure. I printed the details and die cut them with Presscut oval dies. 

New Baby Boy Memory Book

 

I have made another page for my Baby Boy Memory Book. 

I have used the page element dies from Tonic to create this opening page. I added satin ribbon to close the page. I printed "Outings" and die cut it with a Presscut oval die from a nesting set. I added the pram die cut which I cut with a Marianne die.

Personalised 18th Birthday Card

 

I have made an 8x8in white easel card. I have matt and layered the top and base with red card then black and white spotty card. I printed the details and die cut them.

The "N" had been die cut with a Xcut die from a nesting set and added to a red circle. I die cut the name with a Sue Wilson banner die, added it to a slighter larger banner and added it to my card. I attached the banners and then circles. I die cut the detail using a Tonic Studios die set. Finally I die cut the printed sentiment with a Tonic die from a nesting set and added it to a slighter larger rectangle before adding it to my card using foam pads.

I would like to enter this creation into the following challenges:

avenue613 #January 2023 - anything goes (5/8)*

Baby Boy Memory Book

I have made another two pages to my Memory Book. I added blue card to these pages. I made an opening layer on the Bath Time page. I added the cut image from Stamperia paper. I added magnets between the layers on this page

I added the image which is from the Stamperia set on the opposite page. I  added the photo pocket which I cut with a Tonic die. The Sweet Baby die cut is made using a Sue Wilson die. I printed the sentiments and die cut them with dies from a Presscut nesting set and then I added them to my pages.

 

More pages for my Baby Boy Memory Book

 

I covered these pages with blue card. The pocket I created is made using a Crafters Companion die. I printed the "My 1st Home" and die cut it with an oval die from a Presscut nesting set and then added this to a blue oval before attaching to the pockets. Amongst layers on this page I have added magnets for a closure. I also made an opening page and also added magnets between the layers on this page. I used Stamperia on the front of this along with a die cut sentiment which I cut with a Sheena Douglass die.   

More pages from Baby Boy Memory Book

 

I have made more pages for my New Baby Boy Memory Book.

I have covered the pages with paper from Stamperia.

I cut further layers and cut them in half and added adhesive to three outside edges to create pockets. I add the patterned paper to the pockets. I cut the tags using a Tonic die. I printed "My" and die cut them with an oval die from a Presscut nesting set and then added to a blue oval before adding to the pages. I did the same with "Photograph" which I printed. The family dies are from Crafters Companion. I completed these pages with satin ribbon on the tags

Memory Book

 

On the inside cover of this Memory Book have printed "Handprint" and die cut it with one of the dies from the Memory Book die set

I used a Crafters Companion die to embellish this page

I made a page using additional die cut pages and created an opening page with ribbon to close the page. I added personalised details to the inside which a printed. I also printed "Photograph" numerous times to use throughout my book which I have die cut with a die from a Presscut nesting set and then added it to blue oval before attaching it to pages. 

The Start Of A New Baby Memory Book

 

Badges to be worn at Gender Reveal party

 

I  have made these badges using die cut circles. On each circle I added loops of satin ribbon and then attached them together. I have used dies to cut the letters and added them to the badges. I attached brooch pins to the back 

I would like to enter these creations into the following challenge:

avenue613 #January 2023 - anything goes (4/8)*

classicdesign #1 - anything goes (unlimited)*

pearlysparkles #80 - no design paper (unlimited)*

unicorn #83 - baby (unlimited)*

cardsgalore #107 - anything goes (3/3)*

craftrocket #99 - not square (unlimited)*

craftycalendar #January - add a sentiment (2/3)*

 

Guess The Weight

 

I have made this for a Baby Gender Reveal party. 

I have used an office notice board and covered it with white paper along with lace and ribbon. 

I used crystal art stamps from "Craft Buddy" to do the wording. I matt and layered the words with pink and blue card before adding it to my project. I die cut the element for guests to write their predictions. I used dies from a nesting set from "The Works".  I mounted the shapes onto blue or pink card before adding them to my project.

I would like to enter this project into the following challenges:

avenue613 #January 2023 - anything goes option winter (3/8)*

classicdesign #1 - anything goes (unlimited)8

pearlysparkles #80 - no design paper (unlimited)*

unicorn #83 - baby (unlimited)*

cardsgalore #107 - anything goes (2/3)*

craftycalendar #January - add a sentiment (1/3)*

Baby Name Suggestions

 

Another project for the Gender Reveal. I have used a small whiteboard for this project which is from "The Works". I decorated it with lace and ribbon. I also decorated the boxes which are from "Dunelm". The one box had small pieces of white paper and the other box empty for the suggestions. 

I would like to enter this project into the following challenges:

avenue613 #January 2023 - anything goes option winter (2/8)*

classicdesign #1 - anything goes (unlimited)* Best Technique

pearlysparkles #80 - no design paper (unlimited)*

unicorn #83 - baby (unlimited)*

cardsgalore #107 - anything goes (1/3)*

Gender Reveal Project

 

I have made this project for my Niece for her Gender Reveal.

I have used an office notice board and covered it with white card, lace and ribbon. I decorated it. I die cut the elements and added them to the board. The box is from Dunelm. I added lace and ribbon to the box to match the board. I used the box for the onesie die cuts and small pegs. 

The guests at the Gender Reveal will write their names on the relevant colour onesie and then peg it to the ribbon. 

I would like to enter this project into the following challenges:

avenue613 #January 2023 - anything goes option winter (1/8)*

classicdesign #1 - anything goes (unlimited)*

pearlysparkles #80 - no design paper (unlimited)*

unicorn #83 - baby (unlimited)*