Mam Mother's Day Card

 

I have made an 8x8in white card. I matt and layered the top and bottom of  my card with pink  card and then white embossed card. I die cut the heart design in white and pink card. I printed a sentiment and die cut it with a circle to fit inside the heart design. I added three small bottoms to resemble flowers and added some leaves which I cut with a punch. I printed a personalised sentiment and die cut it with a Sue Wilson banner die and mounted it onto a pink banner cut with a slightly bigger die. I added the satin ribbon to a panel of pink card and then attached it to the base of the card using foam pads so the panel would act as a stopper for the easel. I completed my card with Tonic Nuvo drops on the heart.

I would like to enter this card into the following challenges:

avenue613 #March - anything goes optional clean and simple (4/8)

classicdesign #3 - anything goes (unlimited)

pearlysparkles #82 - include a verse/sentiment (unlimited)

wordartwednesday #587 - anything goes (3/5)

creativefingers #250 - anything goes (3/3)

pennys #542 - anything goes (3/3)

die-cut-divas #March - anything goes (4/4)

throughthepurplehaze #202 - anything goes (3/3)

allsorts #720 - anything goes option pastel colours (1/3)

unicorn #85 - dots and/or stripes (unlimited)

trimmiescraft #671 - female (2/2)

sparklesforum #162 - CAS (unlimited)

simplycreatetoo #188 - spring colours (unlimited)

Make my monday #196 - spring colours (3/3)

craftrocket #101 - for the girls (unlimited)

Nannie Mother's Day card

 

A Mother's day card for a Nannie-to-be.

I have used a 6x6in scalloped edge card. I covered it with blue and white polka dot paper. I die cut the deer with dies from a Marianne die set. I assembled to elements then added them to my card. I printed the personalised sentiment and die cut it with a Presscut oval die from a nesting set. I added the sentiment to a kraft card oval before attaching it to my card.

I would like to enter this card into the following challenges:

avenue613 #March - anything goes option clean and simple (3/8)

classicdesign #3 - anything goes (unlimited)

pearlysparkles #82 - include a verse/sentiment (unlimited)

wordartwednesday #587 - anything goes (2/5)

creativefingers #250 - anything goes (2/3)

pennys #542 - anything goes (2/3)

cardsgalore #109 - anything goes (3/3)

die-cut-divas #March - anything goes (3/4)

lilpatchofcraftyfriends #201 - anything goes (3/3)

throughthepurplehaze #202 - anything goes (2/3)

allsorts #719 - anything goes option a trio of something (2/3)

unicorn #85 - dots and/or stripes (unlimited)

trimmiescraft #671 - female (1/2)

sparklesforum #162 - clean and simple (unlimited)

simplycreatetoo #188 - Spring colours (unlimited)

mmmchallengeblog #196 - spring colours (2/3)

craftrocket #101 - for the girls (unlimited)

Mam-to-be Mother's Day Card

                                          

My 1st Mother's Day card for a Mum-to-be.

I have made an 8x8in white easel card. I matt and layered the top and bottom with blue card and then white embossed card.

I have die cut the animals using Marianne die sets. I printed the sentiments and die cut them and mounted them onto blue die cuts before attaching them to my card. I used the sentiment on the base of the card as a stopper for the easel so I attached this to my card with foam pads.

I would like to enter this card into the following challenges:

avenue613 #March - anything goes (2/8)

classicdesign #3 - anything goes (unlimited)

pearlysparkles #82 - include a sentiment/verse (unlimited)

wordartwednesday #587 - anything goes (1/5)

creativefingers #250 - anything goes (1/3)

pennys #542 - anything goes (1/3)

cardsgalore #109 - anything goes (2/3)

craftrocket #101 - for the girls (unlimited)

die-cut-divas #March - anything goes (2/4)

lilpatchofcraftyfriends #201 - anything goes (2/3)

throughthepurplehaze #202 - anything (1/3)

allsorts #719 - anything goes option a trio (1/3)

simplycreatetoo #188 - spring colours (unlimited)

mmmchallengeblog #196 - spring colours (1/3)

Easy favour for baby shower

 

I bought the shower puff from Home Bargains. I printed the personalised details and die cut it. I used a die from a nesting set from The Works, I mounted this onto a blue die cut which I cut with the next size up in the nesting set. I punched a small hole in this element, I put satin ribbon through it and attached it to the puff.

I would like to enter this creation into the following challenges:

avenue613 #March - anything goes (1/8)

classicdesign #3 - anything goes (unlimited)

pearlysparkles #82 - include a sentiment/verse (unlimited)

wordartwednesday #585 - anything goes (1/5)

creativefingers #249 - anything goes (2/3)

pennys #541 - anything goes (1/3)

cardsgalore #109 - anything goes (1/3)

craftrocket #101 - for the girls (unlimited)

die-cut-divas #March - anything goes (1/4)

lilpatchofcraftyfriends #201 - anything goes (1/3)

simplycreatetoo #188 - Spring colours (unlimited)

Badge for Baby Shower

 

I have made this badge using a die cut made with a Crafters Companion Circle Ribbon Frame.

I glued two of  the die cuts together for strength and a neat finish. I added the circle die cut and the sentiment on the front of the badge. I added blue satin ribbon through the die cut. I completed the badge with a brooch pin on the back which I attached this with hot glue. 

I would like to enter this creation into the following challenges:

avenue613 #Feb - anything goes (2/8)*

classicdesign #2 - anything goes (unlimited)*

pearlysparkles #81 - anything goes (unlimited)*
cardsgalore #108 - anything goes (2/3)*

lilpatchofcraftyfriends #200 - anything goes (1/3)*

wordartwednesday #583 - anything goes (1/5)*

creativefingers #249 - anything goes (1/3)

craftycalendar #February - add ribbon (1/3)*

pennys #540 - anything goes (1/3)*

Best Friend Birthday Card

 

I have made an 8x8in easel card. I matt and layered the top and base with purple holographic card and lilac card. I added the white scalloped borders on the top. I cut these with a Sue Wilson die. I also cut the sentiment which is one the top with a Sue Wilson die. I die cut the Happy Birthday with a Crafters Companion die. I attached this sentiment to the base of my card using foam pads so it will act as a stopper for the easel. I completed my card with the Best Friend sentiment which I cut with a Tonic die.

I would like enter this creation into the following challenges:

avenue613 #Feb - anything goes (1/8)*

classicdesign #2 - anything goes (unlimited)*

pearlysparkles #81- anything goes (unlimited)*

unicorn #84 - birthday (unlimited)*
cardsgalore #108 - anything goes (1/3)*

lilpatchofcraftyfriends #199 - anything goes (1/3)

wordartwednesday #581 - anything goes (1/5)*

creativefingers #248 - anything goes (1/3*

Baby Boy Memory Book Spine

 

This is the cover of the spine of my Memory Book. I printed the personalised details and die cut them with a Presscut die and attached it to a blue oval. I covered the white element on the book with blue card, I cut the sides of the layer off so it would fit on the spine neatly. Finally I added the train which I cut with a Marianne die.

Baby Boy Memory Book

 

I covered the final page with Stamperia patterned paper. I made a pocket by adding more layers,  I cut the  top of the layers off and attached the element to my page by only adding glue to the three edges so the top top remains open. I cut tags and added them into the pocket. Finally I printed details and die cut it with Presscut dies.

On the inside back cover I added a blue layer and then a white layer which has "Footprint" printed on the bottom.

New Baby Boy Memory Book

 

I added blue card to these pages. I cut pages diagonally and added a ribbon threading die cut which I cut with a Crafters Companion die. I added blue satin ribbon through these die cuts. I attached these elements to the diagonal elements. I created the pocket by only adding glue to the outside edges. I cut the tags with a Tonic die and added blue satin ribbon to the them. "It's you birthday" and "Party" are cut with Crafters Companion dies. 

New Baby Boy Memory Book

 

Another two pages in my New Baby Boy Memory book

I have added Stamperia paper to both pages. I die cut photo slot with a Tonic die and attached it to the page. I printed the details and die cut them with a die from a Presscut nesting set. Mounted them onto a slightly larger blue oval.

I added an envelope to the opposite page. I used a Crafters Companion die set to make this. I printed the details and cut them as I did on the opposite page. I cut the Baby Boy element with a Cut and Make mini die. 

New Baby Boy Memory Book

 

I have added another page into my book. I made this an opening page. I cut two page elements. I folded one of  pages on the score line then allowed for a glue tap to attach it to my page in the book, I attached small magnets between the page and the blue card to create a magnetic closure. I die cut the small ovals with dies from a Presscut nesting set. I printed the wording to be included in these ovals. I die cut the image from Stamperia paper using the same nesting die set. I added the blue card to the front of this page after cutting a curve again using an oval die. I mounted the image then added that to the front too. I die cut the dummy using a Tonic die. I used parchment to cut the teat for an authentic finish. 

New Baby Boy Memory Book

 

I have covered my page with paper from Stamperia. I cut another page and cut slightly less than a half of it off and added it to my book  by gluing three sides so it creates a pocket. I covered the pocket with the patterned paper and added the die cuts which I cut with a Sheena Douglass die set. I die cut the tags with a Tonic die. I completed the tags with ribbon and a printed "Photograph" which I cut with a Presscut die from a nesting set.   

New Baby Boy Memory Book

 

I have covered my Memory Book page with Stamperia patterned paper. I die cut the photograph element with a Tonic die. I assembled it and then attached to my page. I added a piece of card to fit inside the frame to make it easier for the recipient to add a photograph because they have a template for size. I printed the details and die cut them with Presscut dies from a nesting set then added them to blue ovals before attaching to my page. 

New Baby Boy Memory Book

 

I have used dies in 2 sizes from the Memory Book 1 Collection. I have covered the page with Stamperia paper. I created a pocket using the same size die as the actual page by cutting slightly less than half off the die cut and attaching it to the page on the three edges. I added the patterned paper to the front of the pocket.  I die cut the tags using a Tonic die.  I printed the details and die cut them with a Presscut die from a nesting set. I added the shoes which I cut with Marianne dies. I completed the tags with satin ribbon.

New Baby Boy Memory Book

 

I have used various dies from the Memory Book one set to create this page. I made an opening page and added satin ribbon as a closure. I printed the details and die cut them with Presscut oval dies. 

New Baby Boy Memory Book

 

I have made another page for my Baby Boy Memory Book. 

I have used the page element dies from Tonic to create this opening page. I added satin ribbon to close the page. I printed "Outings" and die cut it with a Presscut oval die from a nesting set. I added the pram die cut which I cut with a Marianne die.

Personalised 18th Birthday Card

 

I have made an 8x8in white easel card. I have matt and layered the top and base with red card then black and white spotty card. I printed the details and die cut them.

The "N" had been die cut with a Xcut die from a nesting set and added to a red circle. I die cut the name with a Sue Wilson banner die, added it to a slighter larger banner and added it to my card. I attached the banners and then circles. I die cut the detail using a Tonic Studios die set. Finally I die cut the printed sentiment with a Tonic die from a nesting set and added it to a slighter larger rectangle before adding it to my card using foam pads.

I would like to enter this creation into the following challenges:

avenue613 #January 2023 - anything goes (5/8)*

Baby Boy Memory Book

I have made another two pages to my Memory Book. I added blue card to these pages. I made an opening layer on the Bath Time page. I added the cut image from Stamperia paper. I added magnets between the layers on this page

I added the image which is from the Stamperia set on the opposite page. I  added the photo pocket which I cut with a Tonic die. The Sweet Baby die cut is made using a Sue Wilson die. I printed the sentiments and die cut them with dies from a Presscut nesting set and then I added them to my pages.

 

More pages for my Baby Boy Memory Book

 

I covered these pages with blue card. The pocket I created is made using a Crafters Companion die. I printed the "My 1st Home" and die cut it with an oval die from a Presscut nesting set and then added this to a blue oval before attaching to the pockets. Amongst layers on this page I have added magnets for a closure. I also made an opening page and also added magnets between the layers on this page. I used Stamperia on the front of this along with a die cut sentiment which I cut with a Sheena Douglass die.   

More pages from Baby Boy Memory Book

 

I have made more pages for my New Baby Boy Memory Book.

I have covered the pages with paper from Stamperia.

I cut further layers and cut them in half and added adhesive to three outside edges to create pockets. I add the patterned paper to the pockets. I cut the tags using a Tonic die. I printed "My" and die cut them with an oval die from a Presscut nesting set and then added to a blue oval before adding to the pages. I did the same with "Photograph" which I printed. The family dies are from Crafters Companion. I completed these pages with satin ribbon on the tags

Memory Book

 

On the inside cover of this Memory Book have printed "Handprint" and die cut it with one of the dies from the Memory Book die set

I used a Crafters Companion die to embellish this page

I made a page using additional die cut pages and created an opening page with ribbon to close the page. I added personalised details to the inside which a printed. I also printed "Photograph" numerous times to use throughout my book which I have die cut with a die from a Presscut nesting set and then added it to blue oval before attaching it to pages. 

The Start Of A New Baby Memory Book

 

Badges to be worn at Gender Reveal party

 

I  have made these badges using die cut circles. On each circle I added loops of satin ribbon and then attached them together. I have used dies to cut the letters and added them to the badges. I attached brooch pins to the back 

I would like to enter these creations into the following challenge:

avenue613 #January 2023 - anything goes (4/8)*

classicdesign #1 - anything goes (unlimited)*

pearlysparkles #80 - no design paper (unlimited)*

unicorn #83 - baby (unlimited)*

cardsgalore #107 - anything goes (3/3)*

craftrocket #99 - not square (unlimited)*

craftycalendar #January - add a sentiment (2/3)*

 

Guess The Weight

 

I have made this for a Baby Gender Reveal party. 

I have used an office notice board and covered it with white paper along with lace and ribbon. 

I used crystal art stamps from "Craft Buddy" to do the wording. I matt and layered the words with pink and blue card before adding it to my project. I die cut the element for guests to write their predictions. I used dies from a nesting set from "The Works".  I mounted the shapes onto blue or pink card before adding them to my project.

I would like to enter this project into the following challenges:

avenue613 #January 2023 - anything goes option winter (3/8)*

classicdesign #1 - anything goes (unlimited)8

pearlysparkles #80 - no design paper (unlimited)*

unicorn #83 - baby (unlimited)*

cardsgalore #107 - anything goes (2/3)*

craftycalendar #January - add a sentiment (1/3)*

Baby Name Suggestions

 

Another project for the Gender Reveal. I have used a small whiteboard for this project which is from "The Works". I decorated it with lace and ribbon. I also decorated the boxes which are from "Dunelm". The one box had small pieces of white paper and the other box empty for the suggestions. 

I would like to enter this project into the following challenges:

avenue613 #January 2023 - anything goes option winter (2/8)*

classicdesign #1 - anything goes (unlimited)* Best Technique

pearlysparkles #80 - no design paper (unlimited)*

unicorn #83 - baby (unlimited)*

cardsgalore #107 - anything goes (1/3)*

Gender Reveal Project

 

I have made this project for my Niece for her Gender Reveal.

I have used an office notice board and covered it with white card, lace and ribbon. I decorated it. I die cut the elements and added them to the board. The box is from Dunelm. I added lace and ribbon to the box to match the board. I used the box for the onesie die cuts and small pegs. 

The guests at the Gender Reveal will write their names on the relevant colour onesie and then peg it to the ribbon. 

I would like to enter this project into the following challenges:

avenue613 #January 2023 - anything goes option winter (1/8)*

classicdesign #1 - anything goes (unlimited)*

pearlysparkles #80 - no design paper (unlimited)*

unicorn #83 - baby (unlimited)*