Wednesday, 25 January 2023

More pages for my Baby Boy Memory Book

 


I covered these pages with blue card. The pocket I created is made using a Crafters Companion die. I printed the "My 1st Home" and die cut it with an oval die from a Presscut nesting set and then added this to a blue oval before attaching to the pockets. Amongst layers on this page I have added magnets for a closure. I also made an opening page and also added magnets between the layers on this page. I used Stamperia on the front of this along with a die cut sentiment which I cut with a Sheena Douglass die.   

Sunday, 22 January 2023

More pages from Baby Boy Memory Book

 


I have made more pages for my New Baby Boy Memory Book.

I have covered the pages with paper from Stamperia.

I cut further layers and cut them in half and added adhesive to three outside edges to create pockets. I add the patterned paper to the pockets. I cut the tags using a Tonic die. I printed "My" and die cut them with an oval die from a Presscut nesting set and then added to a blue oval before adding to the pages. I did the same with "Photograph" which I printed. The family dies are from Crafters Companion. I completed these pages with satin ribbon on the tags

Wednesday, 18 January 2023

Memory Book

 


On the inside cover of this Memory Book have printed "Handprint" and die cut it with one of the dies from the Memory Book die set


I used a Crafters Companion die to embellish this page


I made a page using additional die cut pages and created an opening page with ribbon to close the page. I added personalised details to the inside which a printed. I also printed "Photograph" numerous times to use throughout my book which I have die cut with a die from a Presscut nesting set and then added it to blue oval before attaching it to pages. 


Sunday, 8 January 2023

Badges to be worn at Gender Reveal party

 


I  have made these badges using die cut circles. On each circle I added loops of satin ribbon and then attached them together. I have used dies to cut the letters and added them to the badges. I attached brooch pins to the back 

I would like to enter these creations into the following challenge:

avenue613 #January 2023 - anything goes (4/8)*
classicdesign #1 - anything goes (unlimited)*
pearlysparkles #80 - no design paper (unlimited)*
unicorn #83 - baby (unlimited)*
cardsgalore #107 - anything goes (3/3)*
craftrocket #99 - not square (unlimited)*
craftycalendar #January - add a sentiment (2/3)*

 

Saturday, 7 January 2023

Guess The Weight

 


I have made this for a Baby Gender Reveal party. 

I have used an office notice board and covered it with white paper along with lace and ribbon. 

I used crystal art stamps from "Craft Buddy" to do the wording. I matt and layered the words with pink and blue card before adding it to my project. I die cut the element for guests to write their predictions. I used dies from a nesting set from "The Works".  I mounted the shapes onto blue or pink card before adding them to my project.

I would like to enter this project into the following challenges:

avenue613 #January 2023 - anything goes option winter (3/8)*
classicdesign #1 - anything goes (unlimited)8
pearlysparkles #80 - no design paper (unlimited)*
unicorn #83 - baby (unlimited)*
cardsgalore #107 - anything goes (2/3)*
craftycalendar #January - add a sentiment (1/3)*




Friday, 6 January 2023

Baby Name Suggestions

 


Another project for the Gender Reveal. I have used a small whiteboard for this project which is from "The Works". I decorated it with lace and ribbon. I also decorated the boxes which are from "Dunelm". The one box had small pieces of white paper and the other box empty for the suggestions. 

I would like to enter this project into the following challenges:

avenue613 #January 2023 - anything goes option winter (2/8)*
classicdesign #1 - anything goes (unlimited)* Best Technique
pearlysparkles #80 - no design paper (unlimited)*
unicorn #83 - baby (unlimited)*
cardsgalore #107 - anything goes (1/3)*

Wednesday, 4 January 2023

Gender Reveal Project

 




I have made this project for my Niece for her Gender Reveal.

I have used an office notice board and covered it with white card, lace and ribbon. I decorated it. I die cut the elements and added them to the board. The box is from Dunelm. I added lace and ribbon to the box to match the board. I used the box for the onesie die cuts and small pegs. 

The guests at the Gender Reveal will write their names on the relevant colour onesie and then peg it to the ribbon. 

I would like to enter this project into the following challenges:

avenue613 #January 2023 - anything goes option winter (1/8)*
classicdesign #1 - anything goes (unlimited)*
pearlysparkles #80 - no design paper (unlimited)*
unicorn #83 - baby (unlimited)*



Wednesday, 28 December 2022

Mr & Mrs Claus personalised Christmas Card

 


A personalised Christmas card. This is an A4 card which I have covered with red card and patterned paper from a pad from The Works then attached the satin ribbon to my card. I made the characters using a Tonic die set. I printed the personalised details and die cut them with Crafters Companion dies from nesting sets. 

I would like to enter this card into the following challenges:

lilpatchofcraftyfriends #196 - anything goes (1/3)*
avenue613 #December - anything goes option up in the sky (4/8)*
wordartwednesday #575 - anything goes (1/5)*
creativefingers #245 - anything goes (2/6)*
abcchristmas #14th December - y for youngsters (unlimited)*
die-cut-divas #15th Dec - winter or Christmas themed (1/4)*
throughthecraftroomdoor #6th Dec - anything goes (3/4)*
useyourstuff #473 - anything goes *
crafterscafe #292 - anything goes (2/5)*
pennys #536 - anything goes (3/3)*


Saturday, 17 December 2022

Personalised Birthday Card

 


I covered my 8x8in white card with pink and white spotty card. I die cut the image using a scalloped circle die from a Xcut nesting set. I used the next size die in the set to cut pink card so I could mount the image before attaching it to my card. I printed a personalised sentiment and die cut it with a Spellbinders die from a nesting set and cut pink card using the next size die in the set. I assembled these die cut element onto my card.

I would like to enter this card into the following challenges:

dragonflydreams #4th Dec - anything but Christmas (2/3)*
lilpatchofcraftyfriends #195 - anything goes (3/3)*
avenue613 #December -  anything goes option up in the sky  (3/8)*
wordartwednesday #573 - anything goes (2/5)*
creativefingers #245 - anything goes (1/6)*
throughthecraftroomdoor #6th Dec - anything goes (2/4)*
crafterscafe #292 - anything goes (1/5)*
pennys #536 - anything goes (2/3)*



Wednesday, 7 December 2022

Christmas Greetings Card

 


I have made this card using a Crafters Companion die. I have cut the element into gold mirror card and  then paper pieced the elements. I matt and layered my 6x6in scalloped edge card with red and white card and then added the die cut element. I added a sentiment which I cut with a Sue Wilson die and then completed my creation with red flat backed gems. 

I would like to enter this creation into the following challenges:

lilpatchofcraftyfriends #195 - anything goes (2/3)*
avenue613 #December - anything goes (2/8)*
wordartwednesday #573 - anything goes (1/5)*
throughthecraftroomdoor #6th Dec - anything goes (1/4)*
pennys #536 - anything goes (1/3)*

Monday, 5 December 2022

Condolences Card

 


I have matt and layered my cream 5x7in card with kraft card and then added cream card to half of my card blank followed by satin ribbon.  I die cut the design using a Crafters Companion die set and added that to my card. 

I would like to enter this card into the following challenges:

dragonflydreams #Dec - anything but Christmas (1/3)
lilpatchofcraftyfriends #195 - anything goes (1/3)*
avenue613 #December - anything goes option up in the sky (1/8)
classicdesign #12 - anything goes (unlimited)*



 

Thursday, 17 November 2022

Christmas card


I have made this Christmas card using a set of Tattered Lace dies. 

I cut the layers of the card in white and red card. I curled the layers with a rolling pin.

On the top layer I add a page from a Hunkydory book on one side and a sentiment cut with a Sue Wilson on the opposite side. I added the sentiment to die cut shapes before attaching them to my card. I completed my card with satin ribbon, holly flourishes cut with a Cheery Lynn die and poinsettia cut with Tattered Lace dies. 

I would like to enter this card into the following challenges:

avenue613 #Nov - anything goes optional fancy folds/cuts (3/8)
corrosivechallengesbyjanet #11 - anything goes (2/4)
dragonflydreams #Christmas (2/3)
die-cut-divas #Nov - anything goes (2/4)
pearlysparkles #79 - Merry Christmas (unlimited)
wordartwednesday #569 - anything goes (2/5)
unicorn #82 - Christmas is coming (unlimited)*




 

Sunday, 13 November 2022

Christmas Lamp

 



I have made this Christmas decoration using dies from Claina Palmers Designs dies. I have made the lamp using black card, I added silver ink to all elements to create an authentic finish. I have added acetate to the windows. I bought LED flickering pillar candles from Hobbycraft and added one of them to the base. I decorated the lamp with poinsettia (cut with Marianne dies) and holly flourishes, cut with Cheery Lynn dies. I completed my creation with some gems.

I would like to enter this creation into the following challenges:

lilpatchofcraftyfriends #193 - anything goes (2/3)*
avenue613 #Nov - anything goes option fancy folds and cuts (2/8)
creativefingers #242 - anything goes (2/3)*
classicdesign #11 - anything goes (unlimited)* Best Technique
abcchristmas #9th Nov - x for extra special (unlimited)*
alphabet #4th Nov - P for Precious (1/3)*
allsorts #702 - anything goes option add numbers (1/3)*
cardsgalore #Nov - anything goes (1/3)*
trimmiescraft #657 - anything goes (1/2)*
craftrocket #98 - Christmas/Winter (unlimited)*
craftycalendar #November (1/3)*
craftycatzweekly #614 - anything goes (1/3)*
craftyhazelnutschristmas #620 - anything goes (unlimited)
pennys #534 - anything goes (1/3)*
throughthepurplehaze #198 - monochromatic (1/3)*
throughthecraftroomdoor #8th Nov - anything goes (1/4)*
unicorn #82 - Christmas is coming (unlimited)*
wordartwednesday #569 - anything goes (1/5)*
pearlysparkles #79 - Merry Christmas (unlimited)*
kraftychicks #637 - Christmas (unlimited)*
die-cut-divas #November - anything goes (1/4)*
dragonflydreams #Nov - Christmas (1/3)*
creatalicious #246 - anything goes optional fall (1/3)*
corrosivechallengesbyjanet #11 - anything goes (1/4)*





Sunday, 6 November 2022

21st Birthday card


I have made this easel card using 8x8in square card blanks. 

I covered the top and bottom of my card with kraft card and then blue and white gingham card. 

I printed the details and then die cut the elements using the following dies:

Scalloped circle - Xcut nesting circle set.
Banners - Sue Wilson
Fabulous at: Tonic Studios
Numbers: Tonic Studios
Stopper for the easel: Dies from a set from The Works

I added the rectangles onto the base of my card using foam pads, so it acts as a stopper for the top of my card.

I would like to enter this card into the following challenges:

lilpatchofcraftyfriends #193 - anything goes (1/3)*
avenue613 #Nov - anything goes option fancy folds and cuts (1/8)
creativefingers  #242 - anything goes (1/3)*
classicdesign #11 - anything goes (unlimited)*



 

Thursday, 3 November 2022

21st Birthday Card

 


A very simple card. I was asked for the specific sentiment and the theme to be golf. I matt and layered my white card with blue, green and then white embossed card. I die cut the sentiments and also mounted them onto larger shapes before adding them to my card. I assembled those elements along with the picture

I would like to enter this card into the following challenges:

pennys #533 - anything goes (3/3)*
classicdesign #11 - anything goes (unlimited)*

Wednesday, 2 November 2022

Gingerbread girl

 



 I have made this for a friend's child to take to school to give to her classmate.

I have used a cream DL card and covered it with kraft card and then red spotty cards. I cut the gingerbread girl out with a Cheery Lynn die. I added small pieces of card behind the eyes and the buttons. I die cut small circles and added the gingerbread element to the circle before adding it to my card. I die cut the banners with Sue Wilson dies and added the sentiment which is also cut with a Sue Wilson die. 

I would like to enter this creation into the following challenges:

throughthecraftroomdoor #25th October - anything goes (4/4)*

wordartwednesday #567 - anything goes (5/5)*

avenue613 #10 - anything goes (6/8)

allsorts #700 - anything goes (2/3)*

lilpatchofcraftyfriends #192 - anything goes (2/3)*

pennys #533 - anything goes (2/3)

classicdesign #11 - anything goes (unlimited)*

Tuesday, 1 November 2022

New Baby Card

 


I have matt and layered an A4 card blank with lilac card and then white card. I added the lace and satin ribbon along with a bow down the card. I die cut the vest element with a Sue Wilson die set. I die cut the ovals with Go Kreate dies and added the sentiment which I cut with a Tonic die. I completed my card with Tonic Nuvo drops. 

I would like to enter this card into the following challenges:

wordartwednesday #567 - anything goes (4/5)*
avenue613 #10 - anything goes (5/8)
allsorts #700 - any special occasions (1/3)*
lilpatchofcraftyfriends #192 - anything goes (1/3)*
pennys #533 - anything goes (2/3)
classicdesign #11 - anything goes (unlimited)




Sunday, 30 October 2022

Sent from the heart

 


I wanted to make a card for a friend quickly so I can send it to her, so she knows I am thinking of her

I matt and layered my DL card with kraft card and then cream card to match the card blank.

I die cut the sentiment using a Tonic die and the butterflies using Cheery Lynn dies. 

I would like to enter this card into the following challlenges:

throughthecraftroomdoor #25th October - anything goes (3/4)*
creativefingers #241 - anything goes (3/3)*
wordartwednesday #567 - anything goes (3/5)*
worldwideopendesign #10 - anything goes (3/3)*
avenue613 #10 - anything goes (4/8)


Saturday, 29 October 2022

Birthday card for a guitarist


I have matt and layered my 8x8in card with black card and the checked card. I added black buttons to my card. I printed a sentiment and die cut it will a Presscut Oval die and added it to a black oval before attaching it to my card. I printed a picture of a guitar and cut it out before attaching it to my card. I added the die cut treble clef which I cut with a Cheery Lynn die. I also added the oval with a die cut Dad which is cut with a Sue Wilson die. 

I would like to add this creation to the following challenges:

hroughthecraftroomdoor #25th October - anything goes (2/4)*
creativefingers #241 - anything goes (2/3)*
wordartwednesday #567 - anything goes (2/5)*
worldwideopendesign #10 - anything goes (2/3)*
avenue613 #10  - anything goes (3/8)
pennys #533 - anything goes (1/3)*

 

Sunday, 23 October 2022

Niece 18th Birthday Exploding Box

 


I have made a box using the instructions and dimensions that I have previously added to this page.

I matt and layered every panel with pink card and then white embossed card. I printed sentiments and die cut them with an oval die from a Presscut nesting set, I added these elements to pink ovals before attaching to the panels of my box. I added the shoes to the centre of the box. These are Christmas tree decorations bought from "The Range"  I assembled the box lid and added pink card to the top along with sentiment cut with a Tonic die which I added to a white oval. I completed the box lids with lace and ribbon.

I would like to enter this creation into the following challenges:

throughthecraftroomdoor #25th October - anything goes (1/4)*
creativefingers #241 - anything goes (1/3)*
wordartwednesday #567 - anything goes (1/5)*
worldwideopendesign #10 - anything goes (1/3)*
avenue613 #Oct - anything goes (2/8)* Top Rocker


Monday, 10 October 2022

Cousin 18th Birthday Card


I have made this easel card using scalloped edge 8x8in square card blanks. 

I covered the top and bottom of my card with red card and then black and white spotty card. 

I printed the details and then die cut the elements using the following dies:

Scalloped circle - Xcut nesting circle set.
Banners - Sue Wilson
Fabulous at: Tonic Studios
Numbers: Tonic Studios
Rectangles: Tonic Studios

I added the rectangles onto the base of my card using foam pads, so it acts as a stopper for the top of my card.

I would like to enter this card into the following challenges:

throughthecraftroomdoor #27th September - anything goes (4/4)*
creativefingers #240 - anything goes (2/3)*
classicdesign #10 - anything goes (2/3)*
wordartwednesday #563 - anything goes (4/5)*
aperfecttimetocraft #10 - anything goes (unlimited)
worldwideopendesignteam #09 - anything goes (3/3)*
avenue613 #October 2022 - anything goes (2/8)*
pennys #531 - anything goes using paper (2/3)*
allsorts #697 - anything goes option monochromatic (1/3)*


 

 

Friday, 7 October 2022

Sister Birthday Card

 


I have covered my scalloped edge white 8x8in card with pink mirri card and then white embossed card. I used a Sue Wilson embossing folder. I printed the personalised details. I die cut the sentiment with a Xcut scalloped circle die from a nesting set and added this to a pink mirri scalloped circle which I cut with the next size die in the nesting set. I added this element to my card and then added the key embellishment along with floral embellishments and ribbon. I printed the date and die cut it with an oval Presscut die from a nesting set. I attached this to a pink mirri oval before attaching it to my card. I added small pink mirri card hearts which I cut with a punch in the corners of my card. I completed my card with Tonic Nuvo drops. 

I would like to enter this card into the following challenges:

throughthecraftroomdoor #27th Sept - anything goes (3/4)*
creativefingers #240 - anything goes (1/3)*
classicdesign #10 - anything goes (1/3)*
wordartwednesday #563 - anything goes (3/5)*
cardsgalore #104 - anything goes (3/3)* Random winner
aperfecttimetocraft #10 - anything goes (unlimited)
creatalicious #244 - anything goes with optional for a friend (3/3)*
worldwideopendesignteam #09 - anything goes (2/3)*
crafterscafe #289 - monochrome (2/5)*
avenue613 #Oct - anything goes option favourite beverage (1/8)*
pennys #531 - anything goes using paper (1/3)*
lilpatchofcraftyfriends #191 - anything goes (1/3)*
fabnfunky #558 - embossing wet or dry (unlimited)*
dreamvalley #279 - favourite colours (1/3)*
do-allkreatives #70 - multiple wrinkles (1/3)*
craftycatzweekly #609 - anything goes option autumn colours (1/3)


Monday, 3 October 2022

Memory Book page 8&9


 




I have continued my new baby Memory Book with various memory book dies from the Tonic Studio collections, I used the oval dies to cut the title elements from a Presscut nesting die set. The "Smile" is a Sheena Douglass die and the pram is made from a Marianne die.

I used small magnets between the various layers of the smile page to create a closure for the page. On the "First Outings" page I used satin ribbon to make the closure.


Sunday, 2 October 2022

Memory Book page 6&7


 


I have continued my New Baby Memory Book. I added two pages they were to add details about the new baby's first home and bath time photographs.

The memory book dies are all by Tonic. The oval is cut using Presscut dies, the scalloped circle is by Xcut and the duck is by Sue Wilson.

I would like to these page creations into the following challenges:

throughthecraftroomdoor #27th Sept - anything goes (2/4)*
creativefingers #239 - anything goes (3/3)
classicdesign #10 - anything goes (unlimited)
wordartwednesday #563 - anything goes (2/5)
cardsgalore #104 - anything goes (2/3)
aperfecttimetocraft #10 - anything goes (unlimited)
creatalicious #244 - anything goes optional for a friend (2/3)*



Saturday, 1 October 2022

Baby Memory Book Pages 4&5





I have continued to make my new baby girl Memory Book. 

I have matt and layered the pages using elements from the die sets. I cut the pocket using a Crafters Companion die set. I printed the "Grandparents" and die cut it with an oval die from a Presscut nesting set. Amongst the layers of the closure elements I have added magnets to secure the closure. 

I die cut the pop out element using a Crafters Companion die set. I printed the appropriate elements for the page and die cut them. I used a die from a set from "The Works" to cut the stamp elements and scalloped ovals from a Go Kreate  nesting set to cut the printed elements on the opposite page. I used banner dies from a Sue Wilson set to add the sentiment and the rattle is also a Sue Wilson die.

I would like to enter this element to the following challenges:

throughthecraftroomdoor - anything goes (2/4)
creativefingers #239 - anything goes (2/3)
classicdesign #10 - anything goes (unlimited)* runner up
creativecrafters #56 - anything goes (3/3)
wordartwednesday #563 - anything goes (1/5)
cardsgalore #104 - anything goes (1/3)
aperfecttimetocraft #10 - anything goes (unlimited)
pennys #531 - anything goes (1/3)
creatalicious #244 - anything goes option for a friend (1/3)*
worldwideopendesignteam #09 - anything goes (1/3)*


Tuesday, 27 September 2022

Anniversary Card


I have covered this cream 8x8in card with red card.  I used a page from a Hunkydory book and mounted it onto kraft card before attaching it to my card blank.  I printed a personalised sentiment onto cream card and then die cut it with a die from a nesting set and then mounted the sentiment onto kraft card before attaching it to the card.  

I would like to enter this creation into the following challenges:

throughthecraftroomdoor #27th September - anything goes (1/4)*
creativefingers #239 - anything goes (1/3)*
classicdesign #9 - anything goes (unlimited)
creativecrafters #56 - anything goes (2/3)*
wordartwednesday #561 - anything goes (2/5)
cardsgalore #103 - anything goes (3/3)
allsorts #695 - anything goes option spots and/or stripes (1/3)
avenue613 #09 - anything goes optional leaves (3/8)
crafterscafe #289 - monochrome (1/5)*


 

Thursday, 22 September 2022

Good Luck Card

 


As usual my youngest son asked me this morning if I could make him a card to send today. His friend is moving to Australia to play cricket

Therefore this is a basic card. I have matt and layered my A4 card with green and red card. I printed a personalised sentiment and die cut it with a Go Kreate die and then added it to a green circle before attaching it to my card. I added the image which is from a Hunkydory book. I printed an Australia Flag and a Welsh flag. I added these to my card along with stars which I cut with a punch.

I would like to enter this creation into the following challenges:

wordartwednesday #561 - anything goes (1/5)
classicdesign #9 - anything goes (unlimited)
avenue613 #09 - anything goes optional leaves (2/8)



Tuesday, 13 September 2022

Good Luck Card

 

 
I die cut the handbag elements using dies from a Sue Wilson set. I used black card and gold mirri card to make the handbags. I matt and layered my scalloped edge 8x8in card with gold mirri card, black and white embossed card. I assembled the layers and then added the handbags. I printed a personalised sentiment and die cut it with an oval die from a  Presscut set. I mounted the sentiment onto a black oval which I cut with the next size oval in the nesting set. I added this element to my card and then completed it with Tonic Nuvo drops. 

I would like to enter this creation into the following challenges:

wordartwednesday #559 - anything goes (2/5)*
throughthecraftroomdoor #30th August - anything goes (2/4)*
creativefingers #238 - anything goes (1/3)*
classicdesign #9 - anything goes (unlimited)*
cardsgalore #103 - anything goes (2/3)*
aperfecttimetocraft  # September - anything goes (unlimited)*
 avenue613 #09 - anything goes option leaves (1/8)
unicorn #80 - gold (unlimited)


Thursday, 1 September 2022

Silver Wedding Anniversary card

 


I have covered my A4 card with silver card. I printed the sentiments and die cut them. I used ovals dies from a Presscut set and scalloped circle dies from a Xcut set. 

I cut the photos to size and then mounted them onto white card, then I used a punch to shape the corners.  I added these elements to my card. I die cut the 25 with a Tonic die and added them to the die cut which I cut with dies from a set from The Works. I added this element to my card along with small hearts which I cut with a punch. 

I would like to enter this card into the following challenges:

wordartwednesday #559 - anything goes (1/5)*
throughthecraftroomdoor #30th August - anything goes (1/4)*
pennys #529 - anything goes (1/3)*
allsorts #690/1 - anything goes option roses  (2/3)*
creativefingers #237 - anything goes (2/3)*
classicdesign #9 - anything goes (unlimited)*
cardsgalore #103 - anything goes (1/3)*
aperfecttimetocraft #Sept - anything goes (unlimited)*
creatalicious #242 - anything goes optional summer fun (1/3)*
creativeinspirations #August - anything goes*
worldwideopendesignteam #08 - anything goes (3/3)*
scrapping4fun #216 - alphabet letter "W". wedding anniversary (1/4 cards)*
                                               creativecrafters #55 - anything goes (1/3)*