Wedding Exploding Box

 

I have used a Crafters Companion die set to create this box. I cut the elements in white card. I covered the panels using navy card. I traced inside the die to create the shape for the corners and cut with scissors. By tracing inside the die it allows for the white border like the other panels. I printed personalised sentiments and die cut them. I cut strips of white card and small white circles. I cut small slits into the card along the length on both sides, this creates glue flaps. I attached the white circle die cut. I used the technique to make two sizes to create tiers for a cake. I decorated the cake with lace, ribbon and paper flowers. I attached the cake to the centre of my box with hot glue I added die cuts to decorate the inside of the box. I attached personalised details onto the lid of the box and completed this with ribbon

I would like to enter this creation into the following challenges:

classicdesign #12 - anything goes (unlimited)*

wordartwednesday #625 - anything goes (2/5)

Thank you at Christmas time card

 

I wanted to make a Christmas card with a thank you sentiment.

I have matt and layered my 7x7inch white card with red and gold holographic card. 

I cut the white card to size and then used a Crafters Companion die to cut the sentiment at an angle.

I attached the white card to my card blank. I paper pieced the sentiment with the red holographic card. I die cut the poinsettia using Tattered Lace dies. I assembled the poinsettia and completed them with a flat backed pearl. I added the poinsettia to my card. I die cut the Christmas sentiment and added it to ovals which I cut the Presscut dies before attaching it to my card.

I would like to enter this card into the following challenges:

classicdesign  #12 - anything goes (unlimited)

wordartwednesday #625 - anything goes (1/5)

pennys #561 - anything goes (1/3)*

creativefinger #267 - anything goes (2/3)

lilredwagon #735 - Merry Christmas*

dreamvalley #306 - anything goes (2/3)*

dragonflydreams #December - Christmas (2/3)*

12monthsofchristmaslinkup #107 - anything goes Christmas (1/10)

Christmas Bauble and Star

 

I have made these decorations using Tonic Studios die sets. 

I have made them to match the colour scheme of my usual decorations. 

I made the construction of both of these with white card. I cut the panels and decorations using gold and brown card. I made the finial for the bauble with gold mirror card for an authentic finish. I completed the projects with a pearl embellishment and satin ribbon. I added these to a jewellery stand to display them 

I would like to enter this creation into the following challenges:

classicdesign #11 - anything goes (unlimited)* Best Technique winner

wordartwednesday #623 - anything goes (1/5)*

pennys #560 - anything goes (1/3)* Top Three

creatalicious #272 - anything goes (2/3)

creativefingers #267 - anything goes (1/3)*

lilredwagon #733 - bohemian rhapsody/3 different elements* Featured project 

dreamvalley #306 - anything goes (1/3)*

tuesdaytaggers #28th Nov - Traditional Christmas*

dragonflydreams #December - Christmas (1/3)*

Gingerbread Christmas Card

 

I have made this simple card for a child to replicate so they can send them to their class friends.

I have matt and layered a DL card with kraft card and dotty card.

I die cut the circle and banners in kraft card and then cream card. I cut the gingerbread girl in kraft card. I added a small piece of red card to the back for the "buttons" and black card for the "eyes". I die cut the sentiment with a Sue Wilson die. I assembled all the elements onto my card

I would like to enter this creation into the following challenges:

classicdesign #11 - anything goes (unlimited)

wordartwednesday #621 - anything goes (2/5)

pennys #559 - anything goes (2/3)*

12monthsofchristmaslinkup #106 - anything goes (4/10)

audsentiments #307 - Christmas and sentiment (3/5)

dreamvalley #305 - Occasions other than birthdays (1/3)*

creatalicious #271 - anything goes (1/3)

pearlysparkles #90 - Christmas//Winter (unlimited)*

40th Birthday Card

 

I have added patterned card to my 7x7in white card. I die cut the age elements using Tonic dies. I printed a personalised sentiment and die it with a Presscut oval die from a nesting set. I mounted the sentiment onto a silver oval before attaching it to my card blank. 

I would like to enter this card into the following challenges:

creativefingers #265 - anything goes (3/3)*

classicdesign #10 - anything goes (unlimited)*

wordartwednesday #621 - anything goes (1/5)

pennys #559 - anything goes (1/3)*

Personalised Wall Hanging

 

I have bought this wall hanging from my local floristry supplies. I stamped and cut the letters with Craft Buddy stamps and dies. I coloured the elements with pens and then attached crystals using Premium Glue

I would like to enter this creation into the following challenges:

classicdesign #10 - anything goes (unlimited)*

12monthsofchristmaslinkup #106 - anything goes (3/10)

audsentiments #307 - Christmas and sentiment (2/5)

pearlysparkles #90 - Christmas/Winter (unlimited)

 

DL Gingerbread House Card

 

I have matt and layered my DL card with Craft Buddy holographic card and then white stamping card. I die cut the oval elements using a Craft Buddy nesting dies. I stamped the image and sentiment using Craft Buddy stamps. I coloured the image with pens before adding crystals. I added satin ribbon down my card before adding the oval element.

I would like to enter this creation into the following challlenges:

creativefingers #265 - anything goes (2/3)*

classicdesign #10 - anything goes (unlimited)*

12monthsofchristmas #106 - anything goes (2/10)

audsentiments #307 - Christmas and sentiment (1/5)

pearlysparkles #90 - Christmas/Winter (unlimited)*

Baby's 1st Christmas Card

 

I have created this card using the Craft Buddy Sparkalicious Cookie alphabet. I stamped the sentiment onto strips of white card. I matt and layered my A4 card with holographic card and then white card. I mounted the strips onto red card before attaching them to my card blank. I also added a few gingerbread men to my card. I coloured the letters. I used Craft Buddy Premier glue to attach the crystals to the stamped elements.

I would like to enter this card into the following challenges:

creativefingers #265 - anything goes (1/3)*

creatalicious #270 - anything goes optional in the forest (3/3)

classicdesign #10 - anything goes (unlimited)*

12monthsofchristmas #106 - anything goes (1/10)

pearlysparkles #90 - Christmas/Winter (unlimited)*

Love & Hugs

 

I have matt and layered my 6x6in white scalloped edge card blank with gold holographic card and then white card. I stamped the sentiment onto the white card. I coloured the sentiment with pens, then I added crystals using Premier Glue from Craft Buddy. The holographic card, stamps and glue are all from Craft Buddy.

I would like to  enter this card into the following challenges:

classicdesign #10 - anything goes (unlimited)*

Bedroom plaque

 

I have used a hanging MDF shape which I bought from my local florist supplier. I have used Craft Buddy stamps and dies to create the sentiment and the Christmas tree and gingerbread house. I coloured the elements and then used Craft Buddy Premium glue to attached them crystals. 

I would like to enter this creation into the following challenges:

creativefingers #264 - anything goes (2/3)*

creatalicious #270 - anything goes optional in the forest (2/3)

Love U Decoration

 

I have used a heart decoration which is from my local floristry supplier. I attached Craft Buddy patterned paper to the back of the heart. I stamped and die cut the letters and heart using Craft Buddy stamps and dies. I added the crystals to these elements before attaching them to my project. 

I would like to enter this creation into the following challenges:

dreamvalley #304 - autumn colours (1/3)*

creativefingers #264 - anything goes (1/3)*

creatalicious #270 - anything goes optional in the forest (1/3)

dragonflydreams #October - autumn (2/3)*

Gingerbread heart Card

 

I have matt and layered my 6x6in white scalloped edge card with beautiful card from craftbuddy. I stamped and cut the hearts with craftbuddy stamps and dies . I added a strip of glitter card and then patterned card down my card blank and then added three of the hearts. I added the crystals to the hearts to complete my project.

I would like to enter this creation into the following challenges:

wordartwednesday #619 - anything goes (5/5)*

classicdesign #10 - anything goes (unlimited)*

allsorts #752 - anything goes (3/3)*

Girly Christmas Card

 

I have used an 8x8in white card blank. I cut the front of the card blank in half (keep the removed piece).

I cut an piece of acetate to size and added it to the inside of  the front of the card blank. I added the removed piece of card onto the back of the front of the card so the attached side of acetate is sandwiched between the two pieces of white card. I cut the patterned paper to size to add to the inside of the card and the front panel of the card. I stamped and die cut the heart, gingerbread man and gingerbread house using Craft Buddy stamps and dies. I coloured these elements and added crystals to them. I stamped a sentiment and die cut it with a die from a Craft Buddy oval nesting set. I cut the decorative element from the nesting set in mirror card to mount the sentiment before attaching it to the acetate. I die cut the ovals again and added them to the reverse of the acetate for a neat finish.

I would like to enter this creation into the following challenges:

wordartwednesday #619 - anything goes (4/5)*

classicdesign #10 - anything goes (unlimited)*

allsorts #752 -  anything goes (2/3)*

Personalised Retirement Card

 

I have made an A4 card because I was asked to include a number of images. I have printed the personalisation elements. I mounted all the images onto red card which I cut to size. I die cut the scalloped oval with a Xcut die from a nesting set.  I printed a personalised sentiment then die cut it with a larger die from the nesting set. I then cut a red scalloped circle to mount the sentiment. I matt and layered my card with red card and then white embossed card. I added all the elements to my card and then added flowers which I cut with a punch. I added flat backed pearls to the flowers and then finally added Tonic Nuvo drops to the background.

I would like to add this creation to the following challenges:

wordartwednesday #619 - anything goes (3/5)*

classicdesign #10  - anything goes (unlimited)*

allsorts #752 - embossing - heat or dry (1/3)*

pennys #558 - anything goes using paper (3/3)*

Trick or Treat gift for my neighbour

 

I have used a die set from Tonic Studios to create this bag. I printed an Happy Halloween picture and printed the recipients name. I mounted both of those elements onto black card before attaching them to the bag. I closed the bag with a paper fastener after adding chocolates.

I would like to enter this creation into the following challenges:

wordartwednesday #619 - anything goes (2/5)*

lilredwagon #728 - trick or treat*

classicdesign #10 - anything goes (unlimited)*

allsorts #751 - autumn colours/anything goes (3/3)*

dreamvalley #303 - more than one fold (2/3)*

pennys #558 - anything goes using paper (2/3)*

tuesdaytaggers #17th Oct - Halloween*

pearlysparkles #89 - let's go cute (unlimited)*

corrosivechallengesbyjanet #10 - anything goes (4/4)*

dragonflydreams #Oct - Autumn (1/3)*

Nadolig Llawen (Merry Christmas) Decoration

I have used the MDF heart as a template to draw a heart onto the Craft Buddy patterned card.

I attached the patterned card to the heart with Premium Glue. I filed around the sides of the heart. I stamped and die cut the letters to create the sentiment Nadolig Llawen which is Merry Christmas in Welsh. I coloured the letters then added Premium glue with the precision tip to the areas in the design for crystals.  

I would like to enter this creation into the following challenges:

wordartwednesday #619 - anything goes (1/5)*

classicdesign #10 - anything goes (unlimited)*

12monthsofchristmas #105 - anything goes Christmas (2/10)

allsorts #751 - autumn colours/anything goes (2/3)*

pennys #558 - anything goes using paper (1/3)*

pearlysparkles #89 - let's go cute (unlimited)*

corrosivechallengesbyjanet #10 - anything goes (3/4)*

 

Crystal Art Christmas Decoration

 

I have decorated a MDF door handle hanger. I used the hanger as a template to draw a shape in the patterned paper. I attached the patterned paper into the hanger. I filed the edges of the card and then inked around the edges too. I stamped the elements onto Kraft card using Craft Buddy stamps and then die cut them. After adding the stamped elements to my project I added Craft Buddy crystals to complete my project

I would like to enter this creation into the following challenges:

wordartwednesday #617 - anything goes (5/5)*

fabnfunky #582 - make it female (2/2)*

lilredwagon #727 - patterned paper or not*

classicdesign #10 - anything goes (unlimited)*

12monthsofchristmas #105 - anything goes Christmas (1/10)

allsorts #751 - autumn colours or anything goes (1/3)*

corrosivechallengesbyjanet #10 - anything goes (2/4)*

40th Birthday Exploding Box

 

I made this box and lid using a die set from Crafters Companion. To decorate the heart on each of the corners I drew around the inside edge of the die to create a layer of patterned card. I cut squares of patterned paper to size to add to the box sides. I die cut the celebrate and party using Crafters companion dies. I printed personalised sentiments and die cut them with dies from a nesting set from The Works and added them to larger die cuts before attaching them to my box. I made a "cake" using a strip of card and two circles. I added a bow to the front of the cake which I cut with a Cheery Lyn die. I cut the numbers and today with Tattered Lace dies. I added the elements to a small piece of strong acetate. I folded the acetate and attached it to the top of the cake so they would stand up.  

I would like to enter this creation into the following challenges:

avenue613 #Oct 2023 - anything goes (8/8)

wordartwednesday #617 - anything goes (4/5)*

dreamvalley #303 - more than one fold (1/3)*

fabnfunky #582 - make it female (1/2)*

corrosivechallengesbyjanet #10 - anything goes (1/4)*

40th Birthday Card

 

I have matt and layered my white A4 card with navy card and purple holographic card. I die cut the both and glasses with die from a Tonic set. I used Crafters Companion numbers to add to the banner which I cut with Sue Wilson dies. I stamped the "Est." and die cut it with a die from a nesting set from The Works. I used a Crafters Companion die to cut the element for the personalised sentiment. I completed my card with flowers which I cut with a punch and added flat backed pearls to them.

I would like to enter this card into the following challenges:

avenue613 #Oct 2023 - anything goes (7/8)

pennys #557 - anything goes (3/3)*

movingalongwiththetimes #159 - anything goes (5/5)*

wordartwednesday #617 - anything goes (3/5)*

Cocktail Birthday Card

 

I have matt and layered my 8x8in white card with holographic card and white embossed card. I used a Hunkydory image and added that to kraft card before attaching it to my card blank. I printed a personalised sentiment and die cut it with an oval die from Presscut. I die cut larger ovals in kraft card and holographic to mount my sentiment before attaching it to my card. 

I would like to enter this creation into the following challenges:

avenue613 #October 2023 - anything goes (6/8)

pennys #557 - anything goes (2/3)*

movingalongwiththetimes #159 - anything goes (4/5)*
wordartwednesday #617 - anything goes (2/5)*

Girlie Birthday Card

 

I have matt and layered my 8x8in white scalloped edge card with pink holographic card and black and silver spotty card. I attached satin ribbon across the centre of my card. I used an image from a Hunkydory book. I mounted the image onto black card before attaching it to my card blank. I printed a personalised sentiment and die cut it. I mounted the sentiment onto pink card before attaching it my card blank. 

I would like to enter this card into the following challenges:

avenue613 #October 2023 - anything goes (5/8)

pennys #557 - anything goes (1/3)*

movingalongwiththetimes #159 - anything goes (3/5)*

wordartwednesday #617 - anything goes (1/5)*

Motorbike 21st Birthday Card

 

I have matt and layered my 8x8in white card with kraft card, red card and then white card.  I have used a page from a Hunkydory book. I mounted the image onto red and kraft card before attaching it to my card blank. I printed the birthday sentiment and die cut it with a die from a nesting set from The Works, I mounted the sentiment onto kraft and red layers cut with larger dies from the nesting set. I die cut the numbers using Marianne die and added them to the die cut shape I cut using a Crafters Companion die before attaching them to my card blank.

I would like to enter this card into the following challenges:

avenue613 #October 2023 - anything goes (4/8)

die-cut-divas #Oct - layer a die cut over another die cut (4/4)

pennys #556 - anything goes (2/3)

movingalongwiththetimes #159 - anything goes (2/5)*

21st Birthday Card

 

I have matt and layered my 8x8in white easel card with gold mirror card and checked patterned card. I used black card for die cutting

I printed the details and die cut them. I used circle dies and the rectangles which are from Crafters Companion. I used Sue Wilson banners and  and decorative die and numbers from Tonic Studios.

I would like to enter this creation into the following challenges:

wordartwednesday #615 - anything goes (5/5)*

avenue613 #Oct 2023 - anything goes (3/8)

cardsgalore #116 - anything goes (3/3)*

pinkgem #20 - anything goes*

lilpatchofcraftyfriends #215 - anything goes (3/3)*

die-cut-divas #Oct - layer a die cut over another die cut (3/4)

classicdesign #9 - anything goes (unlimited)

pennys #556 - anything goes (1/3)

lilredwagon #725 - fall colours

movingalongwiththetimes #159 - anything goes (1/5)*

tuesdaytaggers #3rd Oct - Autumn (unlimited)

Anniversary Exploding Box

 

I have used Crafters Companion Exploding box dies to make this creation. I die cut the box sides in white card. I drew on the pink metallic cut using the inside of the die, drawing on the inside allowed slightly smaller panels so it left a border like you do when you matt and layer your projects. I added the die cuts. I printed personalised sentiments which I cut with a die from a nesting set from The Works. I added the teddy with hot glue. I bought the teddy from a local floristry supplies. 

I would like to enter this creation into the following challenges:

wordartwednesday #615 - anything goes (4/5)*

allsorts #748 - anything goes (3/3)

pennys #556 - anything goes (3/3)

avenue613 #Oct - anything goes (2/8)

cardsgalore #116 - anything goes (2/3)*

pinkgem #120 - anything goes

dreamvalley #301 - occasion other than birthday (2/3)

lilpatchofcraftyfriends #215 - anything goes (2/3)*

die-cut-divas #October - layer a die cut over another die cut (2/4)

pearlysparkles #89 - let's go cute (unlimited)

Nutcracker Christmas Card

 

I cut the front of my 8x8in white card in half (keep the removed half safe)

I added acetate to the back of the front on my card and then added the removed half onto the back to cover to create a neat finish.

I attached gold holographic card to the inside of the card and to the front of the card. I cut white card to size then stamped the nutcracker image using a Craft Buddy stamp. I coloured the image with pens. I added Craft Buddy magic glue to the design and then added crystals. I cut the ovals using Craft Buddy dies and stamped a sentiment to the ovals before attaching them to the acetate of my card. I added the same ovals onto the back of the acetate for a neat finish.  

I would like to enter this card into the following challenges:

wordartwednesday #615 - anything goes (3/5)*

allsorts #748 - anything goes (2/3)

craftycatzweekly #652 - anything goes (3/3)*

classicdesign #9 - anything goes (unlimited)

avenue613 #Oct - anything goes (1/8)

cardsgalore #116 - anything goes (1/3)*

pinkgem #20 - anything goes 

addictedtostamps #455 - die cuts and stencils 

12monthsofchristmas #105 - anything Christmas goes option fancy folds/shaped cards (1/10)

dreamvalley #301 -  occasions other than birthday (1/3)

lilpatchofcraftyfriends #215 - anything goes (1/3)*

jinglebellesrock #29th September - stories of Christmas/ The Nutcracker

die-cut-divas #October - lay a die cut over another die cut (1/4)

pearlysparkles #89 - let's go cute (unlimited)

Bauble Christmas Card

 

A Christmas card I have made using dies from the Craft Buddy 3D decoration dies. The corners are made using the Christmas tree die. I die cut two of the Christmas trees in purple holographic card. I cut each of these Christmas trees in half. I stamped the sentiment using a Craft Buddy stamp which I then die cut with a Craft Buddy die set.  I started to assemble my card by matt and layering with purple and silver holographic card and then white card. I added the die cuts to my card. I then die cut the bauble and added it to my card before paper piecing it. Finally I added silver ribbon to the bauble.  

I would like to enter this card into the following challenges:

wordartwednesday #615 - anything goes (2/5)*

allsorts #748 - anything goes (1/3)*

pennys #556 - anything goes (2/3)*

craftycatzweekly #652 - anything goes option spots or stripes (2/3)*

Snowflake Christmas Card

 

I have matt and layered my 6x6in scalloped edge white card with silver card then purple holographic card.  I die cut the snowflake using dies from Craft Buddy. I stamped a Craft Buddy sentiment and cut the card to size before attaching it to my card blank. I  completed my card with crystals on the snowflakes.

I would like to enter this card into the following challenges:

wordartwednesday #615 - anything goes (1/5)*

pennys #556 - anything goes (1/3)*

craftycatzweekly #652 - anything goes option spots or stripes (1/3)*

Anniversary Card

 

I have used a Tonic Sentimental Frame. I die cut all the elements of the die set and assembled them onto an 8x8in white card. I added a personalised sentiment.

wordartwednesday #613 - anything goes (3/5)

classicdesign #9 - anything goes (unlimited)

avenue613 #Sept - anything goes (6/8)

allsorts #747 - anything goes (1/3)*

pennys #555 - anything goes (3/3)*

cardsgalore #115 - anything goes (3/3)*

creativefingers #262 - anything goes (3/3)*

Baubles Christmas Card

I have made this card using dies and holographic card from Craft Buddy. 

I have matt and layered my 8x8in scalloped edge card with holographic card and white card. I have die cut the baubles in the gold holographic card and then attached the baubles to my card blank. I die cut  the baubles with pink holographic card and paper pieced the gold baubles. I added satin ribbon and bows to  the tops of the baubles. I stamped a sentiment onto white card then added it to pieces of the holographic card before attaching it to my card blank.

I would like to enter this card into the following challenges:

wordartwednesday  #613 - anything goes (2/5)* Top Three

classicdesign #9 - anything goes (unlimited)*

avenue613 #Sept - anything goes (5/8)*
allsorts #746 - anything goes (2/3)*
pennys #555 - anything goes (2/3)*

cardsgalore #115 - anything goes (2/3)*
creativefingers #261 - anything goes (2/3)*

 

Personalised Birthday Card

 

I made this card using a Tonic Studios Sentimental Frame die set.

I made an easel card so I had space to personalise the card.

I ordered photographs of my little Nephew and cut them with dies to fit into the die cut design 

I matt and layered the base with blue and then white card. I printed a personalised sentiment which I die cut and the added it on blue die cuts before attaching it to the base of my card with foam pads so it can act as a stopper for the easel.

I would like to enter this card into the following challenges:

wordartwednesday #613 - anything goes (1/5)

classicdesign #9 - anything goes (unlimited)

avenue613 #Sept - anything goes (4/8)

allsorts #746 - anything goes (1/3)

pennys #555  - anything goes (1/3)*

pinkgem #Wk 19 - anything goes 

cardsgalore #115 - anything goes (1/3)*

creativefingers #261 - anything goes (1/3)*

trimmiescraft #690 - Baby/Family (1/2)

craftycatzweekly #15th Sept - anything goes option with dies (1/3)

cutiepie #186 - Birthday and/or bears (1/3)

dragonflydreams #September - Happy Birthday (1/3)

Train Card

 

I have matt and layered my 8x8in white card with navy card and then holographic card from Craft Buddy

I stamped the train, numbers and letters with Craft Buddy stamps. I coloured the stamped elements with pens and then added the Craft Buddy magic glue so I could add crystals. I added lace and satin ribbon across the card  I cut the stamped elements to size and mounted them onto navy card before adding to my card blank. 

I would like to enter this creation into the following challenges:

wordartwednesday #611 - anything goes (3/10)

craftycalendar #September - anything goes (3/3)

classicdesign #9 - anything goes (unlimited)

avenue613 #September 2023 - purely anything goes (3/8)

allsorts #744 - anything goes (3/3)

pennys #554 - anything goes (3/3)

pearlysparkles #88 - Pink/Pearls/Sparkle (unlimited)*

Candle Birthday Card

 

I matt and layered my 6x6in white scalloped edge card with pink card and then patterned paper. I used a Sue Wilson die set to create the birthday cake. I then use an alphabet die set to add the name.

I would like to enter this creation into the following challenges:

wordartwednesday #611 - anything goes (2/10)

craftycalendar #September - anything goes (2/3)

classicdesign #9 - anything goes (unlimited)

pennys #554 - anything goes (2/3)

avenue613  #September 2023 - purely anything goes (2/3)

allsorts #744 - anything goes (2/3)

pearlysparkles #88 - Pink/Pearls/Sparkle (unlimited)*

Lily's 13th Birthday Card

 

I have made this personalised card for my Niece who is 13 today.

I matt and layered my 8x8in white card with red mirror card and then black and white dotty paper. 

I added satin ribbon across my card. I have used an image from a Hunkydory book on my card. I mounted the image onto red mirror card before attaching it to my card blank. I printed a personalised sentiment and die cut it and mounted it onto a larger black die cut before attaching it to my card. I die cut the "13" with Tattered Lace dies and added them to a die cut shape and then added it to a slightly larger black die cut before attaching it my card. 

I would like to enter this card into the following challenges:

wordartwednesday #611 - anything goes (1/10)

craftycalendar #Sept - anything goes (1/3)

pinkgem #8 - anything goes

creativefingers #260 - anything goes (3/3)

classicdesign #9 - anything goes (1/3)

pennys #554 - anything goes (1/3)

avenue613 #September 2023 - purely anything goes (1/8)

allsorts #744 - anything goes (1/3)

Patterned paper lantern

 

I have made this lantern using dies and paper from Craft Buddy. 

Star Lantern

 

I have made this creation using a Craft Buddy die set. I die cut the inside with white card and strips with Craft Buddy Holographic card. 

I would like to enter this creation into the following challenges:

wordartwednesday #609/610 - anything goes (3/5)*

creativefingers #260 - anything goes (3/3)

classicdesign #August - anything goes (3/3)* Best Technique winner

pennys #553 - anything goes (3/3)* Random winner