Love U Decoration

 

I have used a heart decoration which is from my local floristry supplier. I attached Craft Buddy patterned paper to the back of the heart. I stamped and die cut the letters and heart using Craft Buddy stamps and dies. I added the crystals to these elements before attaching them to my project. 

I would like to enter this creation into the following challenges:

dreamvalley #304 - autumn colours (1/3)*

creativefingers #264 - anything goes (1/3)*

creatalicious #270 - anything goes optional in the forest (1/3)

dragonflydreams #October - autumn (2/3)*

Gingerbread heart Card

 

I have matt and layered my 6x6in white scalloped edge card with beautiful card from craftbuddy. I stamped and cut the hearts with craftbuddy stamps and dies . I added a strip of glitter card and then patterned card down my card blank and then added three of the hearts. I added the crystals to the hearts to complete my project.

I would like to enter this creation into the following challenges:

wordartwednesday #619 - anything goes (5/5)*

classicdesign #10 - anything goes (unlimited)*

allsorts #752 - anything goes (3/3)*

Girly Christmas Card

 

I have used an 8x8in white card blank. I cut the front of the card blank in half (keep the removed piece).

I cut an piece of acetate to size and added it to the inside of  the front of the card blank. I added the removed piece of card onto the back of the front of the card so the attached side of acetate is sandwiched between the two pieces of white card. I cut the patterned paper to size to add to the inside of the card and the front panel of the card. I stamped and die cut the heart, gingerbread man and gingerbread house using Craft Buddy stamps and dies. I coloured these elements and added crystals to them. I stamped a sentiment and die cut it with a die from a Craft Buddy oval nesting set. I cut the decorative element from the nesting set in mirror card to mount the sentiment before attaching it to the acetate. I die cut the ovals again and added them to the reverse of the acetate for a neat finish.

I would like to enter this creation into the following challenges:

wordartwednesday #619 - anything goes (4/5)*

classicdesign #10 - anything goes (unlimited)*

allsorts #752 -  anything goes (2/3)*

Personalised Retirement Card

 

I have made an A4 card because I was asked to include a number of images. I have printed the personalisation elements. I mounted all the images onto red card which I cut to size. I die cut the scalloped oval with a Xcut die from a nesting set.  I printed a personalised sentiment then die cut it with a larger die from the nesting set. I then cut a red scalloped circle to mount the sentiment. I matt and layered my card with red card and then white embossed card. I added all the elements to my card and then added flowers which I cut with a punch. I added flat backed pearls to the flowers and then finally added Tonic Nuvo drops to the background.

I would like to add this creation to the following challenges:

wordartwednesday #619 - anything goes (3/5)*

classicdesign #10  - anything goes (unlimited)*

allsorts #752 - embossing - heat or dry (1/3)*

pennys #558 - anything goes using paper (3/3)*

Trick or Treat gift for my neighbour

 

I have used a die set from Tonic Studios to create this bag. I printed an Happy Halloween picture and printed the recipients name. I mounted both of those elements onto black card before attaching them to the bag. I closed the bag with a paper fastener after adding chocolates.

I would like to enter this creation into the following challenges:

wordartwednesday #619 - anything goes (2/5)*

lilredwagon #728 - trick or treat*

classicdesign #10 - anything goes (unlimited)*

allsorts #751 - autumn colours/anything goes (3/3)*

dreamvalley #303 - more than one fold (2/3)*

pennys #558 - anything goes using paper (2/3)*

tuesdaytaggers #17th Oct - Halloween*

pearlysparkles #89 - let's go cute (unlimited)*

corrosivechallengesbyjanet #10 - anything goes (4/4)*

dragonflydreams #Oct - Autumn (1/3)*

Nadolig Llawen (Merry Christmas) Decoration

I have used the MDF heart as a template to draw a heart onto the Craft Buddy patterned card.

I attached the patterned card to the heart with Premium Glue. I filed around the sides of the heart. I stamped and die cut the letters to create the sentiment Nadolig Llawen which is Merry Christmas in Welsh. I coloured the letters then added Premium glue with the precision tip to the areas in the design for crystals.  

I would like to enter this creation into the following challenges:

wordartwednesday #619 - anything goes (1/5)*

classicdesign #10 - anything goes (unlimited)*

12monthsofchristmas #105 - anything goes Christmas (2/10)

allsorts #751 - autumn colours/anything goes (2/3)*

pennys #558 - anything goes using paper (1/3)*

pearlysparkles #89 - let's go cute (unlimited)*

corrosivechallengesbyjanet #10 - anything goes (3/4)*

 

Crystal Art Christmas Decoration

 

I have decorated a MDF door handle hanger. I used the hanger as a template to draw a shape in the patterned paper. I attached the patterned paper into the hanger. I filed the edges of the card and then inked around the edges too. I stamped the elements onto Kraft card using Craft Buddy stamps and then die cut them. After adding the stamped elements to my project I added Craft Buddy crystals to complete my project

I would like to enter this creation into the following challenges:

wordartwednesday #617 - anything goes (5/5)*

fabnfunky #582 - make it female (2/2)*

lilredwagon #727 - patterned paper or not*

classicdesign #10 - anything goes (unlimited)*

12monthsofchristmas #105 - anything goes Christmas (1/10)

allsorts #751 - autumn colours or anything goes (1/3)*

corrosivechallengesbyjanet #10 - anything goes (2/4)*

40th Birthday Exploding Box

 

I made this box and lid using a die set from Crafters Companion. To decorate the heart on each of the corners I drew around the inside edge of the die to create a layer of patterned card. I cut squares of patterned paper to size to add to the box sides. I die cut the celebrate and party using Crafters companion dies. I printed personalised sentiments and die cut them with dies from a nesting set from The Works and added them to larger die cuts before attaching them to my box. I made a "cake" using a strip of card and two circles. I added a bow to the front of the cake which I cut with a Cheery Lyn die. I cut the numbers and today with Tattered Lace dies. I added the elements to a small piece of strong acetate. I folded the acetate and attached it to the top of the cake so they would stand up.  

I would like to enter this creation into the following challenges:

avenue613 #Oct 2023 - anything goes (8/8)

wordartwednesday #617 - anything goes (4/5)*

dreamvalley #303 - more than one fold (1/3)*

fabnfunky #582 - make it female (1/2)*

corrosivechallengesbyjanet #10 - anything goes (1/4)*

40th Birthday Card

 

I have matt and layered my white A4 card with navy card and purple holographic card. I die cut the both and glasses with die from a Tonic set. I used Crafters Companion numbers to add to the banner which I cut with Sue Wilson dies. I stamped the "Est." and die cut it with a die from a nesting set from The Works. I used a Crafters Companion die to cut the element for the personalised sentiment. I completed my card with flowers which I cut with a punch and added flat backed pearls to them.

I would like to enter this card into the following challenges:

avenue613 #Oct 2023 - anything goes (7/8)

pennys #557 - anything goes (3/3)*

movingalongwiththetimes #159 - anything goes (5/5)*

wordartwednesday #617 - anything goes (3/5)*

Cocktail Birthday Card

 

I have matt and layered my 8x8in white card with holographic card and white embossed card. I used a Hunkydory image and added that to kraft card before attaching it to my card blank. I printed a personalised sentiment and die cut it with an oval die from Presscut. I die cut larger ovals in kraft card and holographic to mount my sentiment before attaching it to my card. 

I would like to enter this creation into the following challenges:

avenue613 #October 2023 - anything goes (6/8)

pennys #557 - anything goes (2/3)*

movingalongwiththetimes #159 - anything goes (4/5)*
wordartwednesday #617 - anything goes (2/5)*

Girlie Birthday Card

 

I have matt and layered my 8x8in white scalloped edge card with pink holographic card and black and silver spotty card. I attached satin ribbon across the centre of my card. I used an image from a Hunkydory book. I mounted the image onto black card before attaching it to my card blank. I printed a personalised sentiment and die cut it. I mounted the sentiment onto pink card before attaching it my card blank. 

I would like to enter this card into the following challenges:

avenue613 #October 2023 - anything goes (5/8)

pennys #557 - anything goes (1/3)*

movingalongwiththetimes #159 - anything goes (3/5)*

wordartwednesday #617 - anything goes (1/5)*

Motorbike 21st Birthday Card

 

I have matt and layered my 8x8in white card with kraft card, red card and then white card.  I have used a page from a Hunkydory book. I mounted the image onto red and kraft card before attaching it to my card blank. I printed the birthday sentiment and die cut it with a die from a nesting set from The Works, I mounted the sentiment onto kraft and red layers cut with larger dies from the nesting set. I die cut the numbers using Marianne die and added them to the die cut shape I cut using a Crafters Companion die before attaching them to my card blank.

I would like to enter this card into the following challenges:

avenue613 #October 2023 - anything goes (4/8)

die-cut-divas #Oct - layer a die cut over another die cut (4/4)

pennys #556 - anything goes (2/3)

movingalongwiththetimes #159 - anything goes (2/5)*

21st Birthday Card

 

I have matt and layered my 8x8in white easel card with gold mirror card and checked patterned card. I used black card for die cutting

I printed the details and die cut them. I used circle dies and the rectangles which are from Crafters Companion. I used Sue Wilson banners and  and decorative die and numbers from Tonic Studios.

I would like to enter this creation into the following challenges:

wordartwednesday #615 - anything goes (5/5)*

avenue613 #Oct 2023 - anything goes (3/8)

cardsgalore #116 - anything goes (3/3)*

pinkgem #20 - anything goes*

lilpatchofcraftyfriends #215 - anything goes (3/3)*

die-cut-divas #Oct - layer a die cut over another die cut (3/4)

classicdesign #9 - anything goes (unlimited)

pennys #556 - anything goes (1/3)

lilredwagon #725 - fall colours

movingalongwiththetimes #159 - anything goes (1/5)*

tuesdaytaggers #3rd Oct - Autumn (unlimited)

Anniversary Exploding Box

 

I have used Crafters Companion Exploding box dies to make this creation. I die cut the box sides in white card. I drew on the pink metallic cut using the inside of the die, drawing on the inside allowed slightly smaller panels so it left a border like you do when you matt and layer your projects. I added the die cuts. I printed personalised sentiments which I cut with a die from a nesting set from The Works. I added the teddy with hot glue. I bought the teddy from a local floristry supplies. 

I would like to enter this creation into the following challenges:

wordartwednesday #615 - anything goes (4/5)*

allsorts #748 - anything goes (3/3)

pennys #556 - anything goes (3/3)

avenue613 #Oct - anything goes (2/8)

cardsgalore #116 - anything goes (2/3)*

pinkgem #120 - anything goes

dreamvalley #301 - occasion other than birthday (2/3)

lilpatchofcraftyfriends #215 - anything goes (2/3)*

die-cut-divas #October - layer a die cut over another die cut (2/4)

pearlysparkles #89 - let's go cute (unlimited)

Nutcracker Christmas Card

 

I cut the front of my 8x8in white card in half (keep the removed half safe)

I added acetate to the back of the front on my card and then added the removed half onto the back to cover to create a neat finish.

I attached gold holographic card to the inside of the card and to the front of the card. I cut white card to size then stamped the nutcracker image using a Craft Buddy stamp. I coloured the image with pens. I added Craft Buddy magic glue to the design and then added crystals. I cut the ovals using Craft Buddy dies and stamped a sentiment to the ovals before attaching them to the acetate of my card. I added the same ovals onto the back of the acetate for a neat finish.  

I would like to enter this card into the following challenges:

wordartwednesday #615 - anything goes (3/5)*

allsorts #748 - anything goes (2/3)

craftycatzweekly #652 - anything goes (3/3)*

classicdesign #9 - anything goes (unlimited)

avenue613 #Oct - anything goes (1/8)

cardsgalore #116 - anything goes (1/3)*

pinkgem #20 - anything goes 

addictedtostamps #455 - die cuts and stencils 

12monthsofchristmas #105 - anything Christmas goes option fancy folds/shaped cards (1/10)

dreamvalley #301 -  occasions other than birthday (1/3)

lilpatchofcraftyfriends #215 - anything goes (1/3)*

jinglebellesrock #29th September - stories of Christmas/ The Nutcracker

die-cut-divas #October - lay a die cut over another die cut (1/4)

pearlysparkles #89 - let's go cute (unlimited)